Mushkin Enhanced
Mushkin Enhanced Source 2.5" 250GB SATA internal SSD MKNSSDSR250GB
A 2.5 inch SATA internal SSD with 250GB of 3D TLC storage delivering up to 560 MBps read and 515 MBps write speeds
- Device TypeInternal Solid State Drive (SSD)
- Used ForConsumer
- Form Factor2.5"
- Capacity250GB
- Memory Components3D TLC
- InterfaceSATA III
- Fast boot and load times with up to 560 MBps sequential read
- Quick file saves and installs at up to 515 MBps sequential write
- Snappy multitasking from 54,000 IOPS random read and 81,000 IOPS random write
- Long-term reliability backed by 1,500,000-hour MTBF and 3D TLC NAND
- Low power draw of 0.08 W idle and 2 W active extends laptop battery life
2.5-inch SATA SSD for everyday builds
The Mushkin Enhanced Source MKNSSDSR250GB is a 250GB internal solid-state drive that fits standard 2.5-inch bays and connects through a SATA interface. It uses 3D TLC NAND with a Silicon Motion SM2258XT controller to deliver reliable storage for consumer desktops and laptops.
Low power draw and quiet operation
With no moving parts the drive runs silently and stays within a 0°C to 70°C operating range. Idle power consumption is 0.08W and active consumption reaches 2W, keeping heat output minimal inside compact chassis.
560 MBps sequential read speed defines upgrade
Rated at up to 560 MBps read and 515 MBps write, the drive saturates the SATA III link and provides a clear speed boost over mechanical disks for boot, application load and file transfer tasks.
Põhijooned
- Fast boot and load times with up to 560 MBps sequential read
- Quick file saves and installs at up to 515 MBps sequential write
- Snappy multitasking from 54,000 IOPS random read and 81,000 IOPS random write
- Long-term reliability backed by 1,500,000-hour MTBF and 3D TLC NAND
- Low power draw of 0.08 W idle and 2 W active extends laptop battery life
Tehnilised andmed
| Brand | Mushkin Enhanced |
|---|---|
| Series | Source |
| Model | MKNSSDSR250GB |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Form Factor | 2.5" |
| Capacity | 250GB |
| Memory Components | 3D TLC |
| Interface | SATA III |
| Controller | Silicon Motion SM2258XT |
| Max Sequential Read | Up to 560 MBps |
| Max Sequential Write | Up to 515 MBps |
| 4KB Random Read | Up to 54,000 IOPS |
| 4KB Random Write | Up to 81,000 IOPS |
| Seek Time | < 0.1 ms |
| MTBF | 1,500,000 hours |
| Features | MEDS (Mushkin Enhanced Data-protection Suite) ensures valuable data is protected StaticDataRefresh technology ensures data integrity SLC caching accelerates burst performance Built-in LDPC ECC Device Sleep mode (DEVSLP) supported SATA 3.0 (6Gb/s) interface (backwards compatible with SATA 2.0 (3Gb/s) and SATA 1.0 (1.5Gb/s)) Supports Security Erase TRIM support (OS/driver support required) High-reliability 3D TLC NAND flash S.M.A.R.T. support User-upgradeable firmware Temperature sensor RoHS, FCC, CE Max sequential speeds measured using ATTO 2.46 at queue depth 10. Max IOPS measured us |
| Power Consumption (Idle) | 0.08W |
| Power Consumption (Active) | 2W |
| Operating Temperature | 0°C ~ +70°C |
| Storage Temperature | -40°C ~ +85°C |
| Max Shock Resistance | 1500G |
| Height | 7.00mm |
| Width | 69.85mm |
| Depth | 100.45mm |
| Tarnekaal | 0.09 kg |
| Pakendi mõõtmed | 168 × 94 × 13 mm |
Küsimused selle toote kohta
How do I install this 2.5" SATA III SSD in a laptop, and which step often trips people up?
Mount the 7 mm drive in the 2.5" bay, connect the SATA data and power cables, then enable AHCI in BIOS before cloning or installing the OS; skipping AHCI leaves the drive running in legacy IDE mode and cuts the 560 MBps read / 515 MBps write potential.
What maintenance or replacement will this MKNSSDSR250GB need over its life?
No mechanical parts require service; firmware is user-upgradeable for bug fixes, and the 1 500 000-hour MTBF with global wear-levelling and StaticDataRefresh means the 3D TLC NAND typically outlasts the host system.
What limit appears first when I hammer this 250 GB drive with sustained writes?
The SLC cache absorbs bursts, but once exhausted the 3D TLC native write speed drops below the 515 MBps peak, and the 2 W active power envelope can trigger thermal throttling at the 70 °C operating ceiling.
Veel samast osakonnast
Kliendid võrdlesid neid ka
Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.
