Me võtame vastu krüptoraha — nii saab teie hoitav krüptoraha osta päris riistvara.Makske krüptorahaga, kulutage seda päris riistvarale. Tasuta kindlustatud tarne kogu maailmas, üle 399 $. Lihtsad, kaubamärgita väliskarbid, saadetud Saksamaalt.Tasuta kindlustatud tarne üle 399 $. Teie kurss lukustatakse 30 minutiks kohe, kui kassa avaneb.Kurss lukustatud 30 minutiks. Iga toode on pitseeritud, selle seerianumber on kontrollitud ja sellel kehtib 24-kuuline garantii.Pitseeritud, 24-kuulise garantiiga.

Hinnavaatlus Logi sisse
Rectangular metal power supply unit with modular cables and large cooling fan

myVolts

myVolts 2000W Mining PSU 8 GPU 16×6+2pin 95%

SKU CH-996Z-R15CM

A 2000W AT power supply with 16×6+2pin connectors supporting up to eight graphics cards and 95% conversion efficiency

  • TypeAT
  • Delivers 2000W to power 8 GPU rigs
  • 95% conversion rate cuts electricity waste
  • 16× 6+2pin connectors feed every card
  • Auto fan spins up at 50 °C limit
  • Sata, 24pin, 4+4pin and big 4pin included

2000W Mining PSU for 8 GPU Rigs

This 2000 watt AT-type power supply is built for cryptocurrency mining rigs that run up to eight graphics cards. It delivers sixteen 6+2-pin connectors, a single 24-pin motherboard plug, one 4+4-pin CPU cable, eight Sata ports and four large 4-pin Molex leads. The unit is designed for continuous high-current operation in dedicated mining frames.

Replacing Lower-Capacity Multi-PSU Sets

A single 2000W module replaces the common practice of daisy-chaining two smaller supplies to feed eight GPUs. The jump is worth it when the rig draws enough sustained load to stress lesser units and when cable clutter from dual PSUs complicates airflow. Builders running cards with extreme power draw must still balance the load across rails to avoid overload.

Sustained Load Behaviour with Auto Fan

Conversion efficiency reaches 95 per cent, reducing waste heat during 24/7 mining. An intelligent temperature-controlled fan spins up only as needed, keeping noise lower while the cards run at full tilt. If internal temperature exceeds 50 degrees, high-temperature protection engages to prevent damage. Each unit passes automated inspection before it leaves the factory.

Põhijooned

  • Delivers 2000W to power 8 GPU rigs
  • 95% conversion rate cuts electricity waste
  • 16× 6+2pin connectors feed every card
  • Auto fan spins up at 50 °C limit
  • Sata, 24pin, 4+4pin and big 4pin included

Tehnilised andmed

TypeAT

Küsimused selle toote kohta

How many 6+2-pin connectors does the 2000W unit provide for eight GPUs?

The PSU includes sixteen 6+2-pin connectors, giving two per card when all eight slots are populated.

What is the first installation step people skip with the AT-form-factor chassis?

Installers often forget to verify that the case supports an AT power supply before mounting the metal shell and routing the 24-pin and 4+4-pin cables.

At what temperature does the automatic protection engage on this model?

The high-temperature protection activates when the internal temperature exceeds 50 degrees, shutting down the unit to prevent damage.

Veel samast osakonnast

Kliendid võrdlesid neid ka

Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.