Me võtame vastu krüptoraha — nii saab teie hoitav krüptoraha osta päris riistvara.Makske krüptorahaga, kulutage seda päris riistvarale. Tasuta kindlustatud tarne kogu maailmas, üle 399 $. Lihtsad, kaubamärgita väliskarbid, saadetud Saksamaalt.Tasuta kindlustatud tarne üle 399 $. Teie kurss lukustatakse 30 minutiks kohe, kui kassa avaneb.Kurss lukustatud 30 minutiks. Iga toode on pitseeritud, selle seerianumber on kontrollitud ja sellel kehtib 24-kuuline garantii.Pitseeritud, 24-kuulise garantiiga.

Hinnavaatlus Logi sisse
Compact green PCB module with 24-pin ATX connector and DC input cables

myVolts

myVolts Santing 300W 12V DC AT Power Supply Module

SKU CH-KCJV-YKQK2

AT-type 300 W module converts 12 V DC input to full ATX rails for mini-ITX and 1U builds

  • TypeAT
  • Industrial solid capacitors deliver stable, reliable operation at high temperatures
  • 24-pin ATX cable plugs straight in for immediate use
  • 300 W output from a 12 V DC source with required adapter
  • Over-current and short-circuit protection keeps connected hardware safe
  • Compact 154 x 35 x 15 mm board fits mini-ITX and 1U cases

AT Power Module for Mini-ITX Builds

The myVolts Santing 300W 12V DC AT Power Supply Module converts a 12V DC source into standard ATX voltages for compact systems. It delivers 300W output with 85% efficiency and includes industrial solid capacitors rated for 0 to 55°C operation. A 24-pin ATX cable and DC input lead are supplied for direct installation.

Suits Embedded and Space-Constrained Systems

Builders assembling Mini-ITX, 1U, HTPC, POS, digital signage or thin-client platforms will find the 154 x 35 x 15mm board fits tight enclosures. Over-current and short-circuit protection safeguard connected hardware. Not suitable for builds that require standard AC input or ATX-form-factor power supplies.

Requires 12V DC Source Up to 25A

The module accepts 11.4-12.6V DC input and draws a maximum of 25A, so the external adapter or battery must sustain that current continuously. Without a capable 12V DC source the unit cannot deliver its rated 300W output.

Põhijooned

  • Industrial solid capacitors deliver stable, reliable operation at high temperatures
  • 24-pin ATX cable plugs straight in for immediate use
  • 300 W output from a 12 V DC source with required adapter
  • Over-current and short-circuit protection keeps connected hardware safe
  • Compact 154 x 35 x 15 mm board fits mini-ITX and 1U cases

Tehnilised andmed

TypeAT

Küsimused selle toote kohta

Should I pick a higher-wattage version for a mining rig or a lower one for a simple HTPC?

This module is a single 300 W design; there are no alternative capacities listed, so you match the 300 W rating to your build's total draw.

What does the 300 W output actually deliver when the board is running inside a 1U case at full load?

It converts a 12 V DC source (11.4–12.6 V, up to 25 A) into ATX rails at 85 % efficiency, giving up to 300 W continuous while the case stays within 0–55 °C.

The board takes a 12 V DC input — what connector standard does that use and what current limit does it enforce?

A dedicated DC input cable plugs into the module; the input is rated for a maximum of 25 A at 12 V, capping the available power at the source.

Veel samast osakonnast

Kliendid võrdlesid neid ka

Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.