BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 $
0.00278531BTC
Laos
NEMIX RAM
NEMIX RAM 1.5TB 12x128GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM Server Memory Kit
A 1.5 TB DDR5 registered ECC kit of twelve 128 GB modules running at 5600 MHz with 1.1 V operation for server workloads
- Capacity1.5TB (12 x 128GB)
- SpeedDDR5 5600 (PC5 44800)
- CAS Latency46
- Voltage1.1V
- ECCYes
- Buffered/RegisteredRegistered
- 5 TB total capacity across twelve 128 GB modules
- DDR5 5600 MT/s rated speed for high-throughput server workloads
- ECC registered design detects and corrects single-bit errors
- Low 1.1 V operating voltage reduces power draw per module
- Dual-rank 2Rx4 organisation maximises density per DIMM slot
Capacity and Configuration
This kit delivers 1.5 TB of registered DDR5 memory across twelve 128 GB modules. It is built for servers that require ECC protection and registered signalling at 5600 MT/s.
Platform Compatibility Check
Verify that your server motherboard supports DDR5 RDIMMs at 5600 MT/s with a 2Rx4 organisation and 1.1 V operation. Confirm the board has twelve available 288-pin slots and that the BIOS accepts this capacity per module.
Suitable Workloads and Limitations
The kit suits virtualisation hosts, database servers and compute clusters that need maximum registered ECC capacity. It is not for desktop PCs or workstations that use unbuffered memory, nor for systems limited to lower module densities or slower DDR5 speeds.
Põhijooned
- 5 TB total capacity across twelve 128 GB modules
- DDR5 5600 MT/s rated speed for high-throughput server workloads
- ECC registered design detects and corrects single-bit errors
- Low 1.1 V operating voltage reduces power draw per module
- Dual-rank 2Rx4 organisation maximises density per DIMM slot
Tehnilised andmed
| Brand | NEMIX RAM |
|---|---|
| Model | Part#: MR44800-724K12-SM-AS-1115HS-TNR |
| Part Number | Part#: MR44800-724K12-SM-AS-1115HS-TNR |
| Capacity | 1.5TB (12 x 128GB) |
| Speed | DDR5 5600 (PC5 44800) |
| CAS Latency | 46 |
| Voltage | 1.1V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major OEM Samsung, Micron, Hynix |
Küsimused selle toote kohta
What comes in the box and is any cable or bracket needed?
The kit contains twelve 128GB DDR5 5600MHz ECC RDIMM modules for a total of 1.5TB. No cables, brackets or extra parts are included; the modules install directly into 288-pin server DIMM slots.
Should I pick this 1.5TB kit or a smaller capacity for my server?
Choose this 1.5TB kit when the workload needs maximum registered ECC capacity across twelve slots. If the platform has fewer slots or the application does not require 1.5TB, a smaller kit with fewer 128GB modules will cost less and leave slots free for future expansion.
What does the 5600MHz speed mean once the modules are installed?
The modules run at DDR5 5600 (PC5-44800) with CAS latency 46 at 1.1V. Actual throughput depends on the server's memory controller and how many slots are populated; the rated 5600MHz is the maximum JEDEC speed these registered DIMMs support.
Veel samast osakonnast
Kliendid võrdlesid neid ka
Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.
