NEMIX RAM
NEMIX RAM 128GB (2x64GB) DDR5 4800 ECC RDIMM CL40 1.1V 2Rx4 THINKMATE RAX-QE12 memory upgrade
A 128 GB DDR5 registered ECC kit with two 64 GB modules running at 4800 MT/s, CL40, 1.1 V, built for Thinkmate RAX-QE12 servers
- Capacity128GB (2 x 64GB)
- SpeedDDR5 4800 (PC5 38400)
- ECCYes
- Buffered/RegisteredRegistered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 128 GB total capacity for demanding server workloads
- DDR5 4800 speed with PC5-38400 bandwidth
- ECC registered design protects data integrity
- Dual-rank 2Rx4 organisation maximises density
- 1 V operation reduces power draw
ThinkMate RAX-QE12 DDR5 ECC RDIMM Kit
This NEMIX RAM kit provides 128GB of DDR5 registered ECC memory in a matched pair of 64GB modules. It is built for the ThinkMate RAX-QE12 rackmount server and similar enterprise platforms that require registered DIMMs. The kit targets IT professionals upgrading mission-critical workloads.
Registered ECC DDR5 4800 CL40 2Rx4
The single specification that decides fit is the registered ECC RDIMM design running at DDR5 4800 with CL40 latency and a 2Rx4 organisation. Consumer motherboards and workstations that accept only unbuffered non-ECC modules cannot use this memory. Verify the server manual lists DDR5 RDIMM support before ordering.
Tool-free DIMM installation with seating checks
Installation follows the standard server procedure: power down, open the chassis, align the 288-pin key notch, and press firmly until both ejector tabs click. The most common issue is a module that appears seated but has one tab partially engaged, which causes a boot-time memory error. Reseat both modules and confirm tab lock before closing the case.
Põhijooned
- 128 GB total capacity for demanding server workloads
- DDR5 4800 speed with PC5-38400 bandwidth
- ECC registered design protects data integrity
- Dual-rank 2Rx4 organisation maximises density
- 1 V operation reduces power draw
Tehnilised andmed
| Brand | NEMIX RAM |
|---|---|
| Series | THINKMATE Server/Workstation Compatible Series Memory |
| Model | THINKMATE DDR5 4800MHZ ECC RDIMM Registered Server Memory |
| Part Number | MR38400-924K2 |
| Capacity | 128GB (2 x 64GB) |
| Speed | DDR5 4800 (PC5 38400) |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | THINKMATE |
| CAS Latency | CL40 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 RDIMM |
| Rank | 2Rx4 |
| Features | DDR5 ECC Registered RDIMM Server Motherboard Compatible |
| Package Content | 128GB (2X64GB) DDR5 4800MHZ PC5-38400 2Rx4 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory KIT |
Küsimused selle toote kohta
What does the 4800 MT/s speed mean once the modules are installed in the ThinkMate RAX-QE12?
The memory will run at DDR5 4800 (PC5 38400) with CL40 latency at 1.1 V, delivering the rated bandwidth and timings the server platform supports.
How does the 288-pin DDR5 RDIMM interface affect what the kit can do in this server?
The registered 288-pin DDR5 RDIMM interface provides error-correcting code and registered buffering required by the RAX-QE12 motherboard, capping operation to the DDR5 4800 standard.
What physical space and slot layout does the 2 x 64 GB kit need to fit the RAX-QE12?
Two 288-pin DDR5 RDIMM slots are required; each module is a standard-height registered DIMM with no heat spreader, so they install directly into the server memory sockets.
Veel samast osakonnast
Kliendid võrdlesid neid ka
Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.



