SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
391,99 $
0.00497904BTC
Laos
NEMIX RAM
NEMIX RAM 128GB (4x32GB) DDR5 4800 CL40 ECC RDIMM Dell Precision 7960 memory upgrade
128 GB DDR5 ECC RDIMM kit (4 × 32 GB) at 4800 MT/s CL40 1.1 V for Dell Precision 7960 workstations
- Capacity128GB (4 x 32GB)
- SpeedDDR5 4800 (PC5 38400)
- ECCYes
- Buffered/RegisteredRegistered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 128 GB total capacity across four 32 GB modules
- DDR5 4800 speed with PC5-38400 bandwidth rating
- ECC registered design detects and corrects data errors
- CL40 CAS latency at 1.10 V operating voltage
- 288-pin RDIMM form factor built for Dell Precision 7960
Dell Precision 7960 DDR5 ECC RDIMM Kit
This 128GB kit contains four 32GB DDR5 4800 CL40 registered DIMMs built for the Dell Precision 7960 rack or tower workstation. Each module operates at 1.1V and uses 288-pin 2Rx8 organisation with on-board ECC for data integrity in professional workloads.
Workstations needing registered ECC memory
The kit suits Dell Precision 7960 owners who require 128GB of registered ECC DDR5 at the platform’s native 4800MT/s speed. Builders using consumer motherboards, laptops or any system that accepts only unbuffered non-ECC UDIMMs cannot use these registered modules.
Registered 2Rx8 DDR5 4800 CL40 at 1.1V
The modules are 2Rx8 registered RDIMMs rated DDR5 4800 (PC5-38400) with CL40 latency at 1.1V. This registration and rank configuration is the single specification that determines whether the memory will initialise in the Precision 7960 memory controller.
Põhijooned
- 128 GB total capacity across four 32 GB modules
- DDR5 4800 speed with PC5-38400 bandwidth rating
- ECC registered design detects and corrects data errors
- CL40 CAS latency at 1.10 V operating voltage
- 288-pin RDIMM form factor built for Dell Precision 7960
Tehnilised andmed
| Brand | NEMIX RAM |
|---|---|
| Series | Dell Server/Workstation Compatible Series Memory |
| Model | Dell DDR5 4800MHZ ECC RDIMM Registered Server Memory |
| Part Number | MR38400-324K4 |
| Capacity | 128GB (4 x 32GB) |
| Speed | DDR5 4800 (PC5 38400) |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | Dell |
| CAS Latency | CL40 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 RDIMM |
| Rank | 2Rx8 |
| Features | DDR5 ECC Registered RDIMM Server Motherboard Compatible |
| Package Content | 128GB (4X32GB) DDR5 4800MHZ PC5-38400 1Rx4 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory KIT |
Küsimused selle toote kohta
Will these 4800 MHz DDR5 ECC RDIMMs run correctly alongside any existing 4800 MHz DDR5 ECC RDIMMs I keep in my Precision 7960?
Yes, matching speed, voltage, registered ECC and 288-pin form factor lets them operate together when installed in the correct Dell-validated slot population.
How can I verify the kit is detected at 4800 MHz with ECC active after installation?
Enter the system BIOS or UEFI and confirm the memory reports 128 GB total, 4800 MT/s data rate, CL40 timings and ECC enabled for each of the four 32 GB modules.
Does the package include only the four 32 GB RDIMMs or are any tools or cables supplied?
The box contains the four 32 GB DDR5 4800 CL40 ECC RDIMM modules only; no installation tools, cables or additional hardware are included.
Veel samast osakonnast
Kliendid võrdlesid neid ka
Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.
