NEMIX RAM
NEMIX RAM 128GB (4x32GB) DDR5 4800 CL40 ECC UDIMM Dell PowerEdge R360
A 128 GB kit of four 32 GB DDR5 4800 ECC unbuffered UDIMMs validated for Dell PowerEdge R360 servers
- Capacity128GB (4 x 32GB)
- SpeedDDR5 4800 (PC5 38400)
- ECCYes
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 128 GB kit expands server memory capacity for demanding workloads
- DDR5 4800 speed delivers high bandwidth for data-intensive applications
- ECC protection detects and corrects memory errors to maintain data integrity
- 1 V operation reduces power draw compared to previous DDR generations
- Validated for Dell PowerEdge R360 ensuring reliable compatibility
Dell PowerEdge R360 compatible 128 GB kit
This 128 GB kit contains four 32 GB DDR5 4800 ECC unbuffered UDIMMs built for the Dell PowerEdge R360 rack server. IT professionals who need verified compatibility for mission-critical workloads can install the matched set with confidence. The modules operate at 1.1 V and carry a CL40 latency rating. They are designed to meet the stability demands of enterprise environments.
Sustained-load behaviour with ECC unbuffered DDR5
Error-correcting code detects and corrects single-bit errors during continuous operation, helping prevent data corruption in long-running server tasks. The unbuffered design connects directly to the memory controller without a register, which keeps latency low for the supported platform. Modules use major OEM chips from Samsung, Micron or Hynix and are stress-tested under load before shipment. This combination supports reliable throughput for database, virtualization and file-service workloads.
Verify your PowerEdge R360 memory configuration
Confirm the server accepts 288-pin DDR5 ECC UDIMMs and that four slots are available for a 4 x 32 GB population. Check the system documentation for maximum supported capacity per slot and any rank or speed limitations that apply to the R360. Ensure the BIOS is current enough to recognise DDR5 4800 modules at 1.1 V. The kit includes no heat spreaders, so airflow across the DIMM area must be adequate.
Põhijooned
- 128 GB kit expands server memory capacity for demanding workloads
- DDR5 4800 speed delivers high bandwidth for data-intensive applications
- ECC protection detects and corrects memory errors to maintain data integrity
- 1 V operation reduces power draw compared to previous DDR generations
- Validated for Dell PowerEdge R360 ensuring reliable compatibility
Tehnilised andmed
| Brand | NEMIX RAM |
|---|---|
| Series | Dell Server/Workstation Compatible Series Memory |
| Model | Dell DDR5 4800MHZ ECC Unbuffered UDIMM |
| Part Number | ME38400-328K4 |
| Capacity | 128GB (4 x 32GB) |
| Speed | DDR5 4800 (PC5 38400) |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | Dell |
| CAS Latency | CL40 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 ECC UDIMM |
| Rank | 2Rx8 |
| Features | DDR5 ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 128GB (4X32GB) DDR5 4800MHZ PC5-38400 2Rx8 1.1V CL40 288-PIN ECC Unbuffered UDIMM KIT |
Küsimused selle toote kohta
How much power does the 1.1 V DDR5 4800 kit draw when the server runs continuously?
Each module operates at 1.10 V, the standard DDR5 voltage, so total power scales with the four 32 GB sticks installed.
What must the Dell PowerEdge R360 already have to accept this 288-pin ECC UDIMM kit?
The R360 needs free UDIMM slots that support DDR5 4800 ECC unbuffered memory and a BIOS that recognises 2Rx8 organisation.
Will the CL40 2Rx8 modules work alongside any original DDR5 4800 sticks still in the R360?
Yes, if the existing memory is also DDR5 4800 ECC unbuffered, the server will run all modules at the common 4800 speed and CL40 latency.
Veel samast osakonnast
Kliendid võrdlesid neid ka
Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.



