NEMIX RAM
NEMIX RAM 16GB DDR5 6400 CL52 1.1V 1Rx8 ECC Registered RDIMM Supermicro H14DST-F memory upgrade
16 GB DDR5-6400 registered ECC RDIMM tuned for Supermicro H14DST-F servers
- Capacity16GB
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- Exact DDR5-6400 CL52 1.1V spec matches Supermicro H14DST-F memory controller
- Registered ECC RDIMM architecture enables full-capacity population with error correction
- 1Rx8 288-pin form factor fits board slot and population rules precisely
- Samsung Micron Hynix OEM chips deliver enterprise-grade signal integrity
- Lifetime replacement warranty with US-based technical support included
Supermicro H14DST-F DDR5 RDIMM
This 16 GB DDR5-6400 registered ECC module is built for the Supermicro H14DST-F motherboard. It matches the board's required 288-pin RDIMM form factor, 1.1 V operating voltage, and CL52 timing so the memory controller recognises full capacity at rated speed.
Sustained enterprise workloads
Registered architecture buffers address and command signals, letting every populated slot run at 6400 MT/s without loading the memory controller. On-die ECC corrects single-bit errors in real time, preventing silent data corruption during long compute runs or virtualised workloads.
Upgrade from slower or unbuffered DDR5
Replacing lower-speed DDR5 or unregistered UDIMMs with this spec-matched RDIMM restores full-channel bandwidth and adds hardware error correction. The jump is worth it when your server manual calls for 1Rx8 registered modules at 1.1 V and you need guaranteed stability at maximum population.
Põhijooned
- Exact DDR5-6400 CL52 1.1V spec matches Supermicro H14DST-F memory controller
- Registered ECC RDIMM architecture enables full-capacity population with error correction
- 1Rx8 288-pin form factor fits board slot and population rules precisely
- Samsung Micron Hynix OEM chips deliver enterprise-grade signal integrity
- Lifetime replacement warranty with US-based technical support included
Tehnilised andmed
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-618K1 |
| Capacity | 16GB |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 1Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 16GB DDR5 6400MHz PC5-51200 1Rx8 1.1V 288-PIN ECC RDIMM KIT |
Küsimused selle toote kohta
How much power does the 1.1V DDR5 RDIMM draw when the server runs continuously?
The module operates at 1.10V, the standard DDR5 RDIMM voltage, so power draw per stick is low and scales with capacity and load rather than exceeding the platform's registered DIMM budget.
What motherboard slot and population rules must my Supermicro H14DST-F already have to accept this 288-pin RDIMM?
The board needs a free DDR5 288-pin RDIMM slot and must follow its manual's population order; this 1Rx8 registered ECC module matches the exact form factor and electrical spec the H14DST-F memory controller expects.
Will this CL52 registered ECC kit run at full 6400 speed alongside older DDR5 modules I keep in the other channels?
The memory controller will train all populated slots to the lowest common speed and timing; mixing ranks or latencies can force the kit below its rated DDR5 6400 CL52, so matching modules per channel is recommended.
Veel samast osakonnast
Kliendid võrdlesid neid ka
Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.



