BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 $
0.00277926BTC
Laos
NEMIX RAM
NEMIX RAM 32GB (2x16GB) DDR4 3200 CL22 1.2V 288-Pin UDIMM Kit for Gigabyte TRX40 AORUS Xtreme
A 32 GB dual-channel DDR4 3200 CL22 1.2 V 288-pin UDIMM kit validated for the Gigabyte TRX40 AORUS Xtreme motherboard
- Capacity32GB (2 x 16GB)
- SpeedDDR4 3200 (PC4 25600)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 32 GB kit expands desktop capacity
- 3200 MHz DDR4 speed supports responsive multitasking
- CL22 latency with 1.20 V keeps power draw low
- 288-pin UDIMM form factor fits Gigabyte TRX40 AORUS Xtreme
- Two 16 GB 1Rx8 modules enable dual-channel operation
Gigabyte TRX40 AORUS Xtreme Memory Kit
This 32GB kit contains two 16GB DDR4 UDIMMs validated for the Gigabyte TRX40 AORUS Xtreme motherboard. Modules run at 3200MHz with CL22 latency at 1.2V. The unbuffered non-ECC design suits desktop workstations using this specific board.
Builders Matching This Exact Motherboard
The kit targets owners of the Gigabyte TRX40 AORUS Xtreme who need 32GB of qualified memory. Buyers with a different TRX40 model or another chipset should verify their board's QVL before purchasing. Systems requiring ECC or registered DIMMs must choose another product.
DDR4 3200 CL22 Specification
The decisive figure is the 3200MHz speed paired with CL22 timing at 1.2V. This exact combination determines whether the modules operate at rated settings on the TRX40 AORUS Xtreme. Any other speed or latency grade would change compatibility.
Põhijooned
- 32 GB kit expands desktop capacity
- 3200 MHz DDR4 speed supports responsive multitasking
- CL22 latency with 1.20 V keeps power draw low
- 288-pin UDIMM form factor fits Gigabyte TRX40 AORUS Xtreme
- Two 16 GB 1Rx8 modules enable dual-channel operation
Tehnilised andmed
| Brand | NEMIX RAM |
|---|---|
| Series | Gigabyte Gaming Motherboard Compatible Series Memory |
| Model | Gigabyte DDR4 3200MHZ Non-ECC Unbuffered UDIMM |
| Part Number | MD25600-618K2 |
| Capacity | 32GB (2 x 16GB) |
| Speed | DDR4 3200 (PC4 25600) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | Gigabyte |
| CAS Latency | CL22 |
| Heat Spreader | No |
| Type | 288-Pin DDR4 UDIMM |
| Rank | 1Rx8 |
| Features | DDR4 Non- ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 32GB (2X16GB) DDR4 3200MHZ PC4-25600 1Rx8 1.2V CL22 288-PIN Non-ECC Unbuffered UDIMM KIT |
Küsimused selle toote kohta
Will the 288-pin DDR4 UDIMM modules fit the four DIMM slots on the Gigabyte TRX40 AORUS Xtreme motherboard?
Yes, each 16 GB module uses the standard 288-pin DDR4 UDIMM form factor that matches the four memory slots on the TRX40 AORUS Xtreme board.
Do I need to enable XMP in the BIOS after seating both sticks, or will the kit run at 3200 MT/s automatically?
The modules are rated at DDR4 3200 with CL22 at 1.20 V; they will boot at JEDEC default speeds and you must enable the XMP profile in BIOS to reach the rated 3200 MT/s.
Since the sticks have no heat spreader, will they need active airflow or replacement after heavy workloads?
The bare modules run at 1.20 V and are designed for continuous operation; adequate case airflow is sufficient and no periodic replacement is required.
Veel samast osakonnast
Kliendid võrdlesid neid ka
Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.
