BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 $
0.00279328BTC
Laos
NEMIX RAM
NEMIX RAM 32GB (2x16GB) DDR4 3200 CL22 2Rx8 1.2V 288-pin UDIMM memory upgrade
A 32 GB dual-channel DDR4 3200 kit with CL22 timing, 1.2 V operation and 288-pin unbuffered modules validated for ASRock B660M boards
- Capacity32GB (2 x 16GB)
- SpeedDDR4 3200 (PC4 25600)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 32 GB total capacity for demanding workloads
- DDR4 3200 speed with PC4-25600 bandwidth
- CL22 latency for responsive operation
- 2 V low voltage reduces power draw
- 288-pin UDIMM fits compatible ASRock B660M boards
32GB DDR4 3200 UDIMM kit
This NEMIX RAM kit supplies 32GB of DDR4 memory as two 16GB unbuffered UDIMM modules. Rated at 3200 MT/s with CL22 latency, the modules run at 1.20V and use 2Rx8 organisation. They are built with major OEM chips and carry no heat spreader.
Suits ASRock B660M board upgrades
The kit is validated for ASRock B660M PG Riptide, B660M Phantom Gaming 4, B660M Pro RS and similar B660M motherboards. Builders needing ECC, registered modules, lower latency or higher frequencies should look elsewhere.
2Rx8 rank decides board compatibility
The 2Rx8 dual-rank layout is the specification that determines whether the memory will initialise on the target ASRock B660M platform. Verify the board's qualified vendor list for 2Rx8 support before purchasing.
Põhijooned
- 32 GB total capacity for demanding workloads
- DDR4 3200 speed with PC4-25600 bandwidth
- CL22 latency for responsive operation
- 2 V low voltage reduces power draw
- 288-pin UDIMM fits compatible ASRock B660M boards
Tehnilised andmed
| Brand | NEMIX RAM |
|---|---|
| Series | ASRock Gaming Motherboard Compatible Series Memory |
| Model | ASRock DDR4 3200MHZ Non-ECC Unbuffered UDIMM |
| Part Number | MD25600-628K2 |
| Capacity | 32GB (2 x 16GB) |
| Speed | DDR4 3200 (PC4 25600) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | ASRock |
| CAS Latency | CL22 |
| Heat Spreader | No |
| Type | 288-Pin DDR4 UDIMM |
| Rank | 2Rx8 |
| Features | DDR4 Non- ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 32GB (2X16GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 288-PIN Non-ECC Unbuffered UDIMM KIT |
Küsimused selle toote kohta
Does my motherboard need four DDR4 UDIMM slots to install both 16 GB modules?
The kit contains two 16 GB DDR4 UDIMM sticks, so two free 288-pin slots are sufficient.
Will the CL22 timing force the whole system to run slower if I keep my existing CL16 DDR4 memory?
The motherboard will run all installed DDR4 modules at the slowest common speed and latency, so mixing CL22 with tighter timings lowers overall memory performance.
How can I confirm the kit is running at 3200 MT/s after installation?
Open Task Manager or BIOS and verify the memory speed reads 3200 MT/s (PC4-25600) with CL22 latency reported.
Veel samast osakonnast
Kliendid võrdlesid neid ka
Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.
