SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
391,99 $
0.00497696BTC
Laos
NEMIX RAM
NEMIX RAM 576GB 12x48GB DDR5 6400 CL52 1.1V ECC RDIMM Kit Supermicro H14DSG-OM memory upgrade
A 576GB DDR5 ECC RDIMM kit of twelve 48GB modules running at 6400 CL52 1.1V, validated for the Supermicro H14DSG-OM motherboard
- Capacity576GB (12 x 48GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- 576GB total capacity with twelve 48GB modules for maximum server density
- DDR5 6400 speed rated at CL52 latency for high-throughput workloads
- Registered ECC architecture corrects single-bit errors preventing silent data corruption
- 1V operating voltage matches platform specification for stable fully-populated operation
- Verified fitment for Supermicro H14DSG-OM motherboard using 288-pin RDIMM form factor
Exact-match DDR5-6400 kit
This 576GB kit contains twelve 48GB DDR5 RDIMM modules rated at 6400MHz with CL52 latency and 1.10V operation. It is built for the Supermicro H14DSG-OM motherboard and delivers registered ECC memory for enterprise workloads.
Registered ECC RDIMM form factor
The 288-pin registered design with 2Rx8 organisation offloads the memory controller so every slot runs fully populated at rated speed. ECC corrects single-bit errors on the fly to prevent silent data corruption.
Low-voltage DDR5 operation
Each module runs at 1.10V, reducing power draw compared with higher-voltage server memory while maintaining full 6400MHz throughput across all twelve slots. The registered architecture keeps signal integrity stable under sustained load.
Põhijooned
- 576GB total capacity with twelve 48GB modules for maximum server density
- DDR5 6400 speed rated at CL52 latency for high-throughput workloads
- Registered ECC architecture corrects single-bit errors preventing silent data corruption
- 1V operating voltage matches platform specification for stable fully-populated operation
- Verified fitment for Supermicro H14DSG-OM motherboard using 288-pin RDIMM form factor
Tehnilised andmed
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-4828K12 |
| Capacity | 576GB (12 x 48GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 576GB 12X48GB DDR5 6400MHz PC5-51200 2Rx8 1.1V 288-PIN ECC RDIMM KIT |
Küsimused selle toote kohta
Will the DDR5-6400 speed run at its rated frequency on my Supermicro H14DSG-OM?
The kit is spec-matched to the H14DSG-OM memory controller, so it will be recognised at full 576GB capacity and operate at DDR5-6400 CL52 without downclocking.
What does PC5-51200 tell me about the memory interface?
PC5-51200 is the JEDEC designation for DDR5-6400, confirming the modules use the standard 288-pin RDIMM interface and will not exceed the board's supported data rate.
Will these 12 modules physically fit the DIMM slots on the H14DSG-OM?
Yes, they are 288-pin registered RDIMMs — the exact form factor the H14DSG-OM requires — so each module seats directly in the board's DDR5 DIMM slots.
Veel samast osakonnast
Kliendid võrdlesid neid ka
Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.
