Me võtame vastu krüptoraha — nii saab teie hoitav krüptoraha osta päris riistvara.Makske krüptorahaga, kulutage seda päris riistvarale. Tasuta kindlustatud tarne kogu maailmas, üle 399 $. Lihtsad, kaubamärgita väliskarbid, saadetud Saksamaalt.Tasuta kindlustatud tarne üle 399 $. Teie kurss lukustatakse 30 minutiks kohe, kui kassa avaneb.Kurss lukustatud 30 minutiks. Iga toode on pitseeritud, selle seerianumber on kontrollitud ja sellel kehtib 24-kuuline garantii.Pitseeritud, 24-kuulise garantiiga.

Hinnavaatlus Logi sisse
Two green 288-pin DDR5 RDIMM modules with black chips, no heat spreader

NEMIX RAM

NEMIX RAM 64GB (2×32GB) DDR5 5600 CL46 2Rx8 ECC Registered RDIMM Supermicro X14SDV-32C-SP3F memory upgrade

SKU CH-YZNF-AD2W3

A 64 GB DDR5 registered ECC kit with two 32 GB modules running at 5600 MHz CL46 and 1.1 V for the Supermicro X14SDV-32C-SP3F motherboard

  • Capacity64GB (2 x 32GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 64GB 2X32GB

  • 64 GB capacity from two 32 GB modules for full server density
  • DDR5 5600 speed with CL46 latency at 1.1 V for rated performance
  • Registered ECC design corrects single-bit errors and supports full population
  • 288-pin RDIMM form factor matches Supermicro X14SDV-32C-SP3F slot requirements
  • Built with major OEM Samsung, Micron or Hynix chips for enterprise stability

Supermicro X14SDV Memory Upgrade

This 64GB kit contains two 32GB DDR5 5600 Registered ECC RDIMMs built for the Supermicro X14SDV-32C-SP3F motherboard. It targets administrators who need to expand server memory with modules that match the board's exact rank, voltage and timing requirements.

DDR5 5600 Registered ECC Limits

The modules run at 1.1V with CL46 latency and a 2Rx8 organisation across 288 pins. Registered buffering lets the memory controller drive every slot at full rated speed, while ECC corrects single-bit errors to prevent silent data corruption. The PC5-44800 bandwidth ceiling and fixed 1.1V supply define the practical performance envelope.

Two-Module Installation Notes

Populating both DIMM slots together satisfies the board's population rules for full-capacity operation. Installers must follow the motherboard manual's slot order and torque guidelines; skipping this step is the most common cause of unrecognised capacity or boot failure. The lack of heat spreaders means airflow clearance around each module should be verified.

Põhijooned

  • 64 GB capacity from two 32 GB modules for full server density
  • DDR5 5600 speed with CL46 latency at 1.1 V for rated performance
  • Registered ECC design corrects single-bit errors and supports full population
  • 288-pin RDIMM form factor matches Supermicro X14SDV-32C-SP3F slot requirements
  • Built with major OEM Samsung, Micron or Hynix chips for enterprise stability

Tehnilised andmed

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-328K2
Capacity64GB (2 x 32GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content64GB 2X32GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Selle mudeli teised versioonid

5 veel samast sarjast

Sama seeria, erinev mälumaht, jahutus või taktsagedus — võrrelge enne otsustamist.

Küsimused selle toote kohta

Should I choose the 2×32 GB kit or a different capacity for my Supermicro X14SDV-32C-SP3F?

The kit provides 64 GB total (2×32 GB) and matches the board's DDR5 5600 Registered ECC requirements; consult your manual for approved population rules and maximum supported capacity.

What does DDR5 5600 CL46 mean for real-world server performance?

The modules run at 5600 MT/s with CAS latency 46 at 1.1 V, delivering the rated bandwidth and error-correcting stability the X14SDV-32C-SP3F memory controller expects when fully populated.

How does the 288-pin Registered ECC RDIMM interface affect compatibility and speed limits?

The 288-pin RDIMM form factor with Registered ECC is required by the X14SDV-32C-SP3F; it enables full-capacity operation at DDR5 5600 (PC5-44800) without down-clocking when all slots are filled.

Veel samast osakonnast

Kliendid võrdlesid neid ka

Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.