BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 $
0.00277711BTC
Laos
NEMIX RAM
NEMIX RAM 64GB (2x32GB) DDR5 5200MHz PC5-41600 2Rx8 1.1V 288-PIN ECC UDIMM Unbuffered server RAM
A 64GB dual-channel DDR5 kit with ECC, 5200MHz speed and 1.1V operation for server workloads
- Capacity64GB (2 x 32GB)
- SpeedDDR5 5200 (PC5 41600)
- CAS Latency44
- Voltage1.1V
- ECCYes
- Buffered/RegisteredUnbuffered
- 64 GB capacity in a dual-channel kit for expanded server memory
- DDR5 5200 MHz speed with PC5-41600 bandwidth for high-throughput workloads
- ECC UDIMM design detects and corrects single-bit errors automatically
- Low 1.1 V operating voltage reduces power draw per module
- 2Rx8 dual-rank organisation increases memory density per channel
64GB DDR5 ECC UDIMM Kit
This 64GB kit contains two 32GB DDR5 5200MHz modules built for servers and workstations that require ECC unbuffered memory. It operates at 1.1V with a CAS latency of 44 and uses a 2Rx8 rank configuration across 288 pins.
Upgrading from lower-capacity DDR5 ECC UDIMMs
The jump is worth it when your workload needs more than 32GB per channel and the platform supports DDR5 5200MHz PC5-41600 speeds. It does not suit systems limited to registered DIMMs or older DDR generations.
Straightforward installation in compatible slots
Align the notch on each 288-pin module with the motherboard key and press firmly until the latches click. The most common issue is mixing these unbuffered ECC sticks with registered memory or populating slots the board does not validate for 2Rx8 density.
Põhijooned
- 64 GB capacity in a dual-channel kit for expanded server memory
- DDR5 5200 MHz speed with PC5-41600 bandwidth for high-throughput workloads
- ECC UDIMM design detects and corrects single-bit errors automatically
- Low 1.1 V operating voltage reduces power draw per module
- 2Rx8 dual-rank organisation increases memory density per channel
Tehnilised andmed
| Brand | NEMIX RAM |
|---|---|
| Model | Part#: ME41600-328K2-SM-AS-1015A-MT-01-G2 |
| Part Number | Part#: ME41600-328K2-SM-AS-1015A-MT-01-G2 |
| Capacity | 64GB (2 x 32GB) |
| Speed | DDR5 5200 (PC5 41600) |
| CAS Latency | 44 |
| Voltage | 1.1V |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
Küsimused selle toote kohta
Does this 288-pin DDR5 UDIMM fit a standard server DIMM slot?
Yes, the 288-pin DDR5 UDIMM form factor matches the standard DDR5 server DIMM socket.
What is the correct way to seat the two 32GB modules, and what step is often missed?
Align the notch with the slot key, press straight down until both side clips click, then verify the motherboard detects 64GB at 5200MHz.
When should the ECC UDIMM kit be replaced or tested?
Run a memory diagnostic if the system logs corrected ECC errors or shows unexpected reboots; otherwise the modules have no scheduled replacement interval.
Veel samast osakonnast
Kliendid võrdlesid neid ka
Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.
