BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 $
0.00277053BTC
Laos
NEMIX RAM
NEMIX RAM 64GB (2x32GB) DDR5 6400MHz CL52 2Rx8 1.1V 288-Pin ECC RDIMM memory upgrade
A 64GB DDR5 registered ECC kit with two 32GB modules at 6400MHz CL52 for Supermicro servers
- Capacity64GB (2 x 32GB)
- ECCYes
- Buffered/RegisteredRegistered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- Compatible SystemSupermicro
- 64 GB total capacity in a matched 2 x 32 GB kit
- DDR5 6400 MHz speed with CL52 latency for responsive server workloads
- ECC registered RDIMM design detects and corrects single-bit errors automatically
- Low 1.10 V operating voltage reduces power draw in dense configurations
- Validated for Supermicro GPU SuperServer SYS-422GS-NBRT-LCC systems
Capacity and purpose
This kit provides 64GB of DDR5 ECC registered memory in two 32GB modules. It is intended for servers and workstations that require error-correcting registered DIMMs for data integrity. Builders needing unbuffered consumer DIMMs or non-ECC memory should look elsewhere.
Sustained-load behaviour
The modules run at 6400MHz with a CAS latency of 52 at 1.1V. Registered buffering and ECC allow the memory controller to maintain signal quality and correct single-bit errors during continuous workloads. The 2Rx8 organisation supports stable throughput in multi-channel server configurations.
Pre-order checks
Verify that your motherboard accepts 288-pin DDR5 RDIMMs and supports registered ECC operation. Confirm the platform can operate memory at 6400MHz and 1.1V without manual tuning. Ensure the system in question is the Supermicro GPU SuperServer SYS-422GS-NBRT-LCC or another board qualified for this exact part number.
Põhijooned
- 64 GB total capacity in a matched 2 x 32 GB kit
- DDR5 6400 MHz speed with CL52 latency for responsive server workloads
- ECC registered RDIMM design detects and corrects single-bit errors automatically
- Low 1.10 V operating voltage reduces power draw in dense configurations
- Validated for Supermicro GPU SuperServer SYS-422GS-NBRT-LCC systems
Tehnilised andmed
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-328K2 |
| Capacity | 64GB (2 x 32GB) |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | Supermicro |
| CAS Latency | CL52 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 RDIMM |
| Rank | 2Rx8 |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 64GB (2 x 32GB) DDR5 6400MHz PC5-51200 2Rx8 1.1V 288-PIN ECC RDIMM KIT |
Küsimused selle toote kohta
How much power do the 1.10V modules draw under sustained load?
Each stick is rated at 1.10V, the standard DDR5 operating voltage, so power draw scales with the 6400MHz data rate and the registered buffer on the DIMM.
What motherboard feature must already be present for this ECC RDIMM kit to function?
The board needs DDR5 RDIMM slots that support registered ECC memory and a memory controller able to address 2Rx8 organisation.
Will the 288-pin DDR5 RDIMM form factor fit in a Supermicro SYS-422GS-NBRT-LCC alongside existing DDR5 RDIMMs?
Yes, the kit uses the standard 288-pin DDR5 RDIMM form factor and 2Rx8 rank layout, so it installs in any compatible DDR5 RDIMM slot on that platform.
Veel samast osakonnast
Kliendid võrdlesid neid ka
Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.
