Me võtame vastu krüptoraha — nii saab teie hoitav krüptoraha osta päris riistvara.Makske krüptorahaga, kulutage seda päris riistvarale. Tasuta kindlustatud tarne kogu maailmas, üle 399 $. Lihtsad, kaubamärgita väliskarbid, saadetud Saksamaalt.Tasuta kindlustatud tarne üle 399 $. Teie kurss lukustatakse 30 minutiks kohe, kui kassa avaneb.Kurss lukustatud 30 minutiks. Iga toode on pitseeritud, selle seerianumber on kontrollitud ja sellel kehtib 24-kuuline garantii.Pitseeritud, 24-kuulise garantiiga.

Hinnavaatlus Logi sisse
Four green DDR5 RDIMM modules in anti-static tray

NEMIX RAM

NEMIX RAM 64GB (4x16GB) DDR5 5600 CL46 1.1V ECC Registered RDIMM Supermicro H14DST-FL memory upgrade

SKU CH-N7PK-342R0

64GB kit of four 16GB DDR5 5600 CL46 1.1V ECC registered RDIMMs built for the Supermicro H14DST-FL motherboard

  • Capacity64GB (4 x 16GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 64GB 4X16GB

Näita veel 30 konfiguratsiooni
  • 64 GB total capacity from four 16 GB modules
  • DDR5 5600 speed with CL46 latency at 1.1 V
  • ECC and registered design prevents silent data errors
  • 288-pin RDIMM form factor matches Supermicro H14DST-FL slots
  • Major OEM Samsung, Micron or Hynix chips ensure enterprise stability

Exact-match server upgrade

This 64 GB kit (four 16 GB modules) is built to the precise DDR5 5600 CL46 1.10 V 1Rx8 registered ECC specification that the Supermicro H14DST-FL memory controller expects. Each 288-pin RDIMM arrives tested for full-capacity recognition at rated speed, eliminating the guesswork of mixing ranks or voltages in a production server.

Thermals and power draw

Operating at the standard DDR5 1.10 V, the modules draw minimal power per stick and run without heat spreaders, relying on the server's directed airflow for cooling. Registered buffering reduces electrical load on the memory controller, keeping system power stable even when all slots are populated under sustained workloads.

What the kit changes

Populating four slots with matched registered ECC DIMMs enables maximum supported capacity while single-bit error correction protects data integrity without software intervention. The bundle provides the exact rank and timing configuration the firmware validates at POST, so the server boots at full frequency without manual tuning or compatibility surprises.

Põhijooned

  • 64 GB total capacity from four 16 GB modules
  • DDR5 5600 speed with CL46 latency at 1.1 V
  • ECC and registered design prevents silent data errors
  • 288-pin RDIMM form factor matches Supermicro H14DST-FL slots
  • Major OEM Samsung, Micron or Hynix chips ensure enterprise stability

Tehnilised andmed

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-618K4
Capacity64GB (4 x 16GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content64GB 4X16GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN ECC RDIMM KIT

Selle mudeli teised versioonid

5 veel samast sarjast

Sama seeria, erinev mälumaht, jahutus või taktsagedus — võrrelge enne otsustamist.

Küsimused selle toote kohta

How do I install the 288-pin DDR5 RDIMMs in the Supermicro H14DST-FL and which slot order avoids a no-post?

Power down, open the chassis, and populate the four RDIMMs following the motherboard manual's population sequence for 1Rx8 registered modules; the board only accepts registered ECC DIMMs in the correct channel order, so verify the silkscreen labels before seating each 288-pin stick.

What maintenance or replacement will the 1.1 V registered ECC kit need over its service life?

The modules have no heat spreaders and no moving parts, so routine upkeep is limited to keeping server airflow clean; if a single-bit error rate ever exceeds ECC correction capability, the affected 16 GB DIMM would be the only component requiring replacement.

At what point does sustained load hit a limit with CL46 5600 MT/s registered memory?

The first bottleneck under continuous heavy traffic is the fixed CAS latency of 46 cycles at 5600 MT/s, which caps random-access throughput before thermal or voltage headroom becomes an issue.

Veel samast osakonnast

Kliendid võrdlesid neid ka

Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.