SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
391,99 $
0.0050194BTC
Laos
NEMIX RAM
NEMIX RAM 64GB DDR4 3200 CL22 2Rx4 ECC RDIMM SuperMicro memory upgrade
64 GB DDR4 3200 ECC registered RDIMM for SuperMicro servers, CL22 2Rx4
- Capacity64GB
- SpeedDDR4 3200 (PC4 25600)
- ECCYes
- Buffered/RegisteredRegistered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 64GB capacity supports heavy server workloads
- DDR4 3200 speed delivers high data throughput
- ECC registered design protects data integrity
- 2Rx4 dual-rank layout maximises memory density
- 2V operation reduces power consumption
SuperMicro ECC RDIMM upgrade
This 64GB DDR4 module targets SuperMicro servers and workstations that require registered ECC memory. It delivers a single 2Rx4 stick rated at 3200MHz with CL22 timings. System builders expanding memory capacity in compatible platforms will find the 288-pin RDIMM form factor matches the required slot specification.
Sustained load behaviour
Registered buffering and ECC correction maintain data integrity during continuous server workloads. The 1.20V operating voltage supports stable operation across extended compute cycles. Major OEM DRAM chips from Samsung, Micron or Hynix underpin consistent throughput without the variability of consumer-grade modules.
Thermals and power
Bare modules without a heat spreader rely on chassis airflow for cooling. The 1.2V DDR4 standard limits power draw per stick, reducing thermal load in dense configurations. Silent operation is inherent as no active cooling components are present on the PCB.
Põhijooned
- 64GB capacity supports heavy server workloads
- DDR4 3200 speed delivers high data throughput
- ECC registered design protects data integrity
- 2Rx4 dual-rank layout maximises memory density
- 2V operation reduces power consumption
Tehnilised andmed
| Brand | NEMIX RAM |
|---|---|
| Series | SuperMicro Server/Workstation Compatible Series Memory |
| Model | SuperMicro DDR4 3200MHZ ECC RDIMM Registered Server Memory |
| Part Number | MR25600-924K1 |
| Capacity | 64GB |
| Speed | DDR4 3200 (PC4 25600) |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | Supermicro |
| CAS Latency | CL22 |
| Heat Spreader | No |
| Type | 288-Pin DDR4 RDIMM |
| Rank | 2Rx4 |
| Features | DDR4 ECC Registered RDIMM Server Motherboard Compatible |
| Package Content | 64GB (1X64GB) DDR4 3200MHZ PC4-25600 2Rx4 1.2V CL22 288-PIN ECC RDIMM Registered Server Memory |
Küsimused selle toote kohta
How much power does the 1.20V 64GB DDR4 3200 module draw under continuous server load?
The module operates at 1.20V DDR4 standard voltage. Registered ECC RDIMMs at this voltage typically draw a few watts per stick under sustained load; exact draw depends on the Supermicro platform and memory controller configuration.
What motherboard slot and chipset support are required to run this 288-pin 2Rx4 ECC RDIMM?
A Supermicro server or workstation board with DDR4 RDIMM slots, registered ECC support, and a memory controller qualified for 2Rx4 64GB density is required. The module is 288-pin DDR4 keyed for registered DIMM sockets only.
Will this CL22 3200MHz module downclock reliably alongside older DDR4 ECC RDIMMs?
JEDEC DDR4 modules negotiate a common speed at boot. When mixed with slower DDR4 ECC RDIMMs, the memory controller will run all populated slots at the lowest common supported frequency and matching timings.
Veel samast osakonnast
Kliendid võrdlesid neid ka
Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.
