SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
391,99 $
0.00505552BTC
Laos
NEMIX RAM
NEMIX RAM 8GB DDR4 3200 CL22 2Rx8 1.2V 260-pin SODIMM memory upgrade
8 GB DDR4 3200 SODIMM for POSIFLEX EK-2450 kiosk, CL22 1.2 V 2Rx8 260-pin
- Capacity8GB
- SpeedDDR4 3200 (PC4 25600)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 8 GB capacity adds headroom for POS workloads
- 3200 MT/s DDR4 speed matches system bus
- CL22 latency keeps timing stable under load
- 2 V operation reduces power draw and heat
- 260-pin SODIMM form factor fits the kiosk slot
POSIFLEX EK-2450 Mercury Series Kiosk Memory
This 8 GB DDR4 3200 SODIMM is built for the POSIFLEX EK-2450 Mercury Series kiosk. It installs as a single 260-pin unbuffered module running at 1.20 V with CL22 latency. The 2Rx8 organisation uses major-brand DRAM chips and is validated for the target platform.
Suits operators upgrading the EK-2450 kiosk to 8 GB
Buyers who need ECC protection, a different pin count, a higher speed grade or a larger capacity should look elsewhere. Systems that require registered DIMMs or a voltage other than 1.20 V cannot use this module.
Deciding specification: DDR4 3200 260-pin SODIMM
Only platforms that accept a 2Rx8 unbuffered DDR4 SODIMM at this speed and voltage will POST correctly. Verify the kiosk manual for the exact slot layout before ordering.
Põhijooned
- 8 GB capacity adds headroom for POS workloads
- 3200 MT/s DDR4 speed matches system bus
- CL22 latency keeps timing stable under load
- 2 V operation reduces power draw and heat
- 260-pin SODIMM form factor fits the kiosk slot
Tehnilised andmed
| Brand | NEMIX RAM |
|---|---|
| Series | POSIFLEX POS Series Point of Sale Kiosk Memory |
| Model | POSIFLEX POS DDR4 3200MHZ Non-ECC Unbuffered SODIMM |
| Part Number | MS25600-828K1 |
| Capacity | 8GB |
| Speed | DDR4 3200 (PC4 25600) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | POSIFLEX POS |
| CAS Latency | CL22 |
| Heat Spreader | No |
| Type | 260-Pin DDR4 SODIMM |
| Rank | 2Rx8 |
| Features | DDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 8GB (1X8GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 260-PIN Non-ECC Unbuffered SODIMM |
Küsimused selle toote kohta
Will this 260-pin SODIMM fit the POSIFLEX EK-2450 Mercury Series kiosk memory slot?
Yes, the module is built for the POSIFLEX POS platform and matches the 260-pin DDR4 SODIMM form factor used by the EK-2450 Mercury Series
What is the correct way to seat this DDR4 SODIMM in the kiosk, and what step is often missed?
Power off the unit, open the memory door, align the module notch with the slot key, insert at an angle, then press down until both retention clips click — skipping the power-off step risks damage
When will this CL22 1.20 V DDR4 3200 module need replacement in a 24/7 point-of-sale kiosk?
DDR4 SODIMMs have no moving parts and run at 1.20 V; under normal thermal conditions they typically last the useful life of the kiosk itself
Veel samast osakonnast
Kliendid võrdlesid neid ka
Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.
