SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
391,99 $
0.0049614BTC
Laos
NEMIX RAM
NEMIX RAM 8GB DDR5 4800 CL40 1Rx6 1.10V UDIMM memory upgrade
Adds 8 GB of DDR5 4800 CL40 memory to compatible Samsung desktops with a 1.10 V unbuffered UDIMM
- Capacity8GB
- SpeedDDR5 4800 (PC5 38400)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 8GB DDR5 capacity expands desktop multitasking headroom
- 4800MHz speed with CL40 latency supports responsive system operation
- 10V low voltage reduces power draw and heat output
- 288-pin UDIMM form factor fits standard DDR5 desktop slots
- Samsung chipset compatibility ensures reliable integration with matched systems
NEMIX RAM DDR5 4800 UDIMM
This NEMIX RAM module provides 8GB of DDR5 4800 memory in a single 288-pin UDIMM. It runs at 1.10V with CL40 latency and uses a 1Rx6 rank configuration. The stick is non-ECC and unbuffered, built with major OEM chips from Samsung, Micron or Hynix. No heat spreader is fitted.
Suits Samsung DDR5 desktops needing a single stick
This module is validated for Samsung systems using the M323R1GB4BB0-CQK part. It works in any desktop board that accepts a non-ECC unbuffered DDR5 UDIMM at 4800 speed. Builders who need ECC, registered DIMMs, a heat spreader or a multi-stick kit should choose a different product.
Fits a standard DDR5 UDIMM slot at 1.10V
The module draws 1.10V from the slot and requires no extra power connectors. Its low-profile design leaves clearance for most CPU coolers. Adding this stick frees capacity on the memory controller for the operating system and applications without changing voltage settings.
Põhijooned
- 8GB DDR5 capacity expands desktop multitasking headroom
- 4800MHz speed with CL40 latency supports responsive system operation
- 10V low voltage reduces power draw and heat output
- 288-pin UDIMM form factor fits standard DDR5 desktop slots
- Samsung chipset compatibility ensures reliable integration with matched systems
Tehnilised andmed
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Memory |
| Model | DDR5 Non-ECC Unbuffered UDIMM Memory |
| Part Number | MD38400-816K1 |
| Capacity | 8GB |
| Speed | DDR5 4800 (PC5 38400) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | Samsung |
| CAS Latency | CL40 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 UDIMM |
| Rank | 1Rx6 |
| Features | DDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 8GB (1 x 8GB) DDR5 4800MHz PC5-38400 1Rx6 1.1V 288-PIN Non-ECC UDIMM |
Küsimused selle toote kohta
Does the motherboard need a 288‑pin DDR5 slot to accept this UDIMM?
Yes, the module is a 288‑pin DDR5 UDIMM and requires a matching DDR5 DIMM socket on the board.
Can this 8 GB stick be used together with other DDR5 modules of different speed or latency?
It will run at the speed and timings of the slowest installed module; mixing CL40 with other DDR5 kits is possible but the system will down‑clock to the lowest common settings.
How can I confirm the module is running at 4800 MT/s and CL40 after installation?
Check the memory speed and CAS latency reported in the BIOS or a tool such as CPU‑Z; they should show 4800 MT/s and CL40 when the system is configured correctly.
Veel samast osakonnast
Kliendid võrdlesid neid ka
Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.
