BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 $
0.00277891BTC
Laos
NEMIX RAM
NEMIX RAM CSE-510FT-203B 64GB (4×16GB) DDR5 4800 CL40 1.1V UDIMM memory upgrade
A 64 GB kit of four 16 GB DDR5 4800 CL40 unbuffered UDIMMs built for Supermicro systems
- Capacity64GB (4 x 16GB)
- SpeedDDR5 4800 (PC5 38400)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 64 GB total capacity from four 16 GB modules
- DDR5 4800 speed rated at PC5-38400 bandwidth
- Low 1.10 V operating voltage for efficient power use
- CL40 CAS latency with 1Rx8 single-rank organisation
- Validated for Supermicro IoT SuperServer SYS-111AD-HN2
System-Specific DDR5 Kit
This NEMIX RAM kit delivers 64 GB of DDR5 memory in four 16 GB UDIMM modules. It is built for the Supermicro IoT SuperServer SYS-111AD-HN2 and X13SAZ-F motherboard, providing a direct upgrade path for that platform.
Upgrade from Lower Capacity or Speed
The kit replaces smaller DDR5 sets or slower memory to raise total capacity to 64 GB at 4800 MT/s with CL40 timing. The jump is worthwhile when the workload demands more simultaneous threads or larger datasets than the current configuration allows.
Suited for Targeted Supermicro Builds
It suits administrators upgrading the named Supermicro server or workstation with validated, non-ECC unbuffered modules. Builders using different motherboards, systems requiring ECC, or platforms that do not support 288-pin DDR5 UDIMMs should look elsewhere.
Põhijooned
- 64 GB total capacity from four 16 GB modules
- DDR5 4800 speed rated at PC5-38400 bandwidth
- Low 1.10 V operating voltage for efficient power use
- CL40 CAS latency with 1Rx8 single-rank organisation
- Validated for Supermicro IoT SuperServer SYS-111AD-HN2
Tehnilised andmed
| Brand | NEMIX RAM |
|---|---|
| Series | SuperMicro Server/Workstation Compatible Series Memory |
| Model | SuperMicro DDR5 4800MHZ Non-ECC Unbuffered UDIMM |
| Part Number | MD38400-618K4 |
| Capacity | 64GB (4 x 16GB) |
| Speed | DDR5 4800 (PC5 38400) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | Supermicro |
| CAS Latency | CL40 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 UDIMM |
| Rank | 1Rx8 |
| Features | DDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 64GB (4X16GB) DDR5 4800MHZ PC5-38400 1Rx8 1.1V CL40 288-PIN Non-ECC Unbuffered UDIMM KIT |
Küsimused selle toote kohta
Will the 288-pin DDR5 UDIMM modules fit the SuperMicro SYS-111AD-HN2 motherboard slots?
Yes, the 288-pin DDR5 UDIMM form factor matches the memory slots on the SuperMicro SYS-111AD-HN2 motherboard used in the CSE-510FT-203B chassis.
What is the correct way to populate the four 16GB modules, and what step is often missed?
Install all four modules into the correct channel slots per the motherboard manual, then press firmly until the retention clips click on both ends of each module.
When should the 1.1V DDR5 4800 CL40 kit be replaced or serviced?
DDR5 modules have no moving parts and require no scheduled maintenance; replace only if memory errors appear or capacity needs exceed the 64GB kit.
Veel samast osakonnast
Kliendid võrdlesid neid ka
Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.
