Me võtame vastu krüptoraha — nii saab teie hoitav krüptoraha osta päris riistvara.Makske krüptorahaga, kulutage seda päris riistvarale. Tasuta kindlustatud tarne kogu maailmas, üle 399 $. Lihtsad, kaubamärgita väliskarbid, saadetud Saksamaalt.Tasuta kindlustatud tarne üle 399 $. Teie kurss lukustatakse 30 minutiks kohe, kui kassa avaneb.Kurss lukustatud 30 minutiks. Iga toode on pitseeritud, selle seerianumber on kontrollitud ja sellel kehtib 24-kuuline garantii.Pitseeritud, 24-kuulise garantiiga.

Hinnavaatlus Logi sisse

NEMIX RAM

NEMIX RAM DDR5 5600 128GB (2x64GB) CL46 1.1V 2Rx4 ECC RDIMM Supermicro H14SSF memory upgrade

SKU CH-7Q5A-J4K0S

A 128 GB DDR5 ECC RDIMM kit for the Supermicro H14SSF, running at 5600 MHz with CL46 latency and 1.1 V registered operation

  • Capacity128GB (2 x 64GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes
  • 128 GB capacity in a matched 2 × 64 GB kit
  • DDR5 5600 speed rated at PC5-44800 for rated throughput
  • Registered ECC design with 2Rx4 rank for full-slot stability
  • CL46 latency at 1.1 V for efficient operation
  • 288-pin RDIMM form factor built for Supermicro H14SSF

H14SSF DDR5 ECC RDIMM Kit

This 128GB kit uses two 64GB DDR5 5600 registered ECC modules built for the Supermicro H14SSF motherboard. The 2Rx4 layout and 1.1V operation match the board's memory controller requirements so the full capacity is recognised at rated speed.

Capacity and Headroom

The 128GB total provides ample headroom for virtualisation hosts, large databases or memory-intensive analytics workloads running on a single H14SSF board. If your application grows beyond 128GB you would need a platform that supports higher per-slot density or more memory channels.

Thermals Noise and Power

Registered DDR5 modules run at 1.1V without heat spreaders, relying on chassis airflow to keep temperatures in check. Power draw scales with the 5600 MT/s data rate and 2Rx4 organisation, staying within standard RDIMM limits for dense server configurations.

Põhijooned

  • 128 GB capacity in a matched 2 × 64 GB kit
  • DDR5 5600 speed rated at PC5-44800 for rated throughput
  • Registered ECC design with 2Rx4 rank for full-slot stability
  • CL46 latency at 1.1 V for efficient operation
  • 288-pin RDIMM form factor built for Supermicro H14SSF

Tehnilised andmed

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-924K2
Capacity128GB (2 x 64GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content128GB 2X64GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Selle mudeli teised versioonid

5 veel samast sarjast

Sama seeria, erinev mälumaht, jahutus või taktsagedus — võrrelge enne otsustamist.

Küsimused selle toote kohta

Will this 2Rx4 DDR5-5600 RDIMM kit work with the existing DDR5 modules already installed in my Supermicro H14SSF?

The kit matches the H14SSF's required 288-pin Registered ECC DDR5-5600 1.1V CL46 2Rx4 specification, so it will be recognised at full 128 GB capacity and run at rated speed when populated according to the board's memory-population rules.

How can I verify the kit is running at DDR5-5600 CL46 1.1V with ECC active after installation?

Enter the BIOS or use a hardware-information utility; the memory should report 5600 MT/s, CL46 timings, 1.1 V, Registered ECC mode, and the full 128 GB (2 x 64 GB) capacity.

What exactly ships in the box and is anything else required for installation?

The package contains the 128 GB (2 x 64 GB) DDR5-5600 CL46 1.1 V 2Rx4 288-pin ECC Registered RDIMM kit only; no additional cables, brackets or software are needed beyond a compatible Supermicro H14SSF motherboard.

Veel samast osakonnast

Kliendid võrdlesid neid ka

Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.