SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
391,99 $
0.00501067BTC
Laos
NEMIX RAM
NEMIX RAM DDR5 6400 16GB CL52 1Rx8 ECC RDIMM H14SHM memory upgrade
16 GB DDR5-6400 ECC registered RDIMM, CL52 at 1.1 V, 1Rx8, 288-pin, validated for Supermicro H14SHM motherboards
- Capacity16GB
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- 16 GB DDR5-6400 capacity matches your server's rated speed
- CL52 latency and 1.1 V voltage meet the memory controller's exact timing
- 1Rx8 registered ECC architecture enables full-slot population with error correction
- 288-pin RDIMM form factor fits the Supermicro H14SHM motherboard precisely
- Major OEM Samsung, Micron, Hynix chips deliver enterprise-grade reliability
16 GB DDR5-6400 ECC RDIMM for Supermicro H14SHM
This 16 GB DDR5 module runs at 6400 MT/s with CL52 latency and 1.1 V operation. It uses a 1Rx8 registered ECC layout on a 288-pin RDIMM form factor. The part is built as an exact-match upgrade for the Supermicro H14SHM motherboard.
Registered buffer and ECC keep full-speed
The registered architecture offloads the memory controller so every slot can run fully populated at the rated 6400 speed. On-die ECC corrects single-bit errors in real time, preventing silent data corruption and unplanned reboots during sustained workloads.
Verify DIMM population rules
Server memory support varies by model and BIOS revision. Consult the Supermicro H14SHM manual for supported capacities, required population order, and installation steps to ensure the module is recognised at full capacity and speed.
Põhijooned
- 16 GB DDR5-6400 capacity matches your server's rated speed
- CL52 latency and 1.1 V voltage meet the memory controller's exact timing
- 1Rx8 registered ECC architecture enables full-slot population with error correction
- 288-pin RDIMM form factor fits the Supermicro H14SHM motherboard precisely
- Major OEM Samsung, Micron, Hynix chips deliver enterprise-grade reliability
Tehnilised andmed
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-618K1 |
| Capacity | 16GB |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 1Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 16GB DDR5 6400MHz PC5-51200 1Rx8 1.1V 288-PIN ECC RDIMM KIT |
Küsimused selle toote kohta
How much power does this 1.1 V DDR5 6400 RDIMM draw when the server runs continuously?
The module operates at 1.10 V, the standard DDR5 voltage, so power draw stays within the platform's registered DIMM budget even with every slot populated.
What motherboard slot and population rules must my Supermicro H14SHM already follow to accept this 288-pin registered ECC DIMM?
The board requires 288-pin DDR5 RDIMMs and has a specific population order; consult the H14SHM manual for approved slot sequence and maximum capacity per channel.
Can I mix this 1Rx8 CL52 registered ECC module with other DDR5 RDIMMs of different rank or latency in the same H14SHM system?
Mixing ranks or timings is not recommended; the memory controller expects identical 1Rx8 CL52 modules in each populated channel for stable operation at 6400 MT/s.
Veel samast osakonnast
Kliendid võrdlesid neid ka
Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.
