NEMIX RAM
NEMIX RAM DDR5 ECC RDIMM 1.5TB 12x128GB 5600MHz CL46 2Rx4 Supermicro H13DSG-O-CPU
1.5 TB registered ECC DDR5 kit with twelve 128 GB modules at 5600 MHz CL46 for Supermicro H13DSG-O-CPU
- Capacity1.5TB (12 x 128GB)
- SpeedDDR5 5600 (PC5 44800)
- ECCYes
- Buffered/RegisteredRegistered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 5 TB total capacity from twelve 128 GB modules
- DDR5-5600 speed with CL46 latency for rated throughput
- Registered ECC design corrects errors and supports full population
- 1 V operation matches the Supermicro H13DSG-O-CPU requirements
- 288-pin RDIMM form factor fits the motherboard's memory slots
1.5 TB DDR5 ECC RDIMM kit for Supermicro
This 12-module kit delivers 1.5 TB of DDR5-5600 registered ECC memory built to the exact rank, voltage and timing the Supermicro H13DSG-O-CPU motherboard expects. Each 128 GB 2Rx4 RDIMM operates at 1.1 V with CL46 latency so the fully populated system runs at its rated speed without manual tuning.
Who this suits and who should look elsewhere
Ideal for administrators expanding a Supermicro H13DSG-O-CPU server to its maximum supported capacity with validated registered ECC modules. Not suitable for workstations or desktops that require unbuffered UDIMMs, for boards limited to lower densities, or for any platform that does not accept 288-pin DDR5 RDIMMs.
What the bundle changes
The package supplies twelve matched 128 GB RDIMMs in a single kit, removing the risk of mixing modules with different ranks or timings and ensuring the memory controller sees a uniform 12 x 128 GB population. No additional software, heat spreaders or accessories are included.
Põhijooned
- 5 TB total capacity from twelve 128 GB modules
- DDR5-5600 speed with CL46 latency for rated throughput
- Registered ECC design corrects errors and supports full population
- 1 V operation matches the Supermicro H13DSG-O-CPU requirements
- 288-pin RDIMM form factor fits the motherboard's memory slots
Tehnilised andmed
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR44800-724K12 |
| Capacity | 1.5TB (12 x 128GB) |
| Speed | DDR5 5600 (PC5 44800) |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | Supermicro |
| CAS Latency | CL46 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 RDIMM |
| Rank | 2Rx4 |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 1.5TB 12X128GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT |
Küsimused selle toote kohta
What motherboard must I already have for this 12-module DDR5 ECC RDIMM kit to be recognised at full 1.5TB capacity?
The kit is validated for the Supermicro H13DSG-O-CPU motherboard; its memory controller expects 2Rx4 registered DDR5 at 1.1V with CL46 timing.
Will these 2Rx4 registered DDR5 modules operate correctly alongside any existing DDR5 RDIMMs already installed in the same board?
Yes, provided the other modules are also DDR5 registered ECC with matching voltage and timing; the memory controller will negotiate a common speed across all populated slots.
How can I verify the kit is running at its rated DDR5-5600 speed after installation?
Check the BIOS memory information or operating-system hardware report — it should show 5600 MT/s (PC5-44800) with CL46 latency on all 12 slots.
Veel samast osakonnast
Kliendid võrdlesid neid ka
Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.
Mushkin Enhanced 4GB DDR2-800 CL6 SoDIMM Apple 971741A memory upgrade
SK hynix HYMD232M646C6-J 256MB DDR 333MHz PC2700 CL2.5 SODIMM laptop RAM
- 4GB (2 x 2GB)



