Me võtame vastu krüptoraha — nii saab teie hoitav krüptoraha osta päris riistvara.Makske krüptorahaga, kulutage seda päris riistvarale. Tasuta kindlustatud tarne kogu maailmas, üle 399 $. Lihtsad, kaubamärgita väliskarbid, saadetud Saksamaalt.Tasuta kindlustatud tarne üle 399 $. Teie kurss lukustatakse 30 minutiks kohe, kui kassa avaneb.Kurss lukustatud 30 minutiks. Iga toode on pitseeritud, selle seerianumber on kontrollitud ja sellel kehtib 24-kuuline garantii.Pitseeritud, 24-kuulise garantiiga.

Hinnavaatlus Logi sisse
Two bare green DDR5 UDIMM sticks in a 96GB kit

NEMIX RAM

NEMIX RAM DDR5 ECC UDIMM 96GB (2×48GB) 5600 CL46 1.1V 2Rx8 memory upgrade

SKU CH-PNNK-YW2A6

A 96 GB DDR5 ECC UDIMM kit (2×48 GB) running at 5600 MT/s with CL46 latency and 1.1 V, validated for Supermicro X14SAE-F motherboards

  • Capacity96GB (2 x 48GB)
  • Type288-Pin DDR5 ECC UDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 96GB 2X48GB

  • 96 GB total capacity from two 48 GB modules for high-density workloads
  • DDR5-5600 speed with CL46 latency and 1.1 V operation for efficient throughput
  • ECC protection detects and corrects single-bit errors to prevent silent data corruption
  • 288-pin unbuffered UDIMM form factor matches Supermicro X14SAE-F motherboard requirements
  • Dual-rank 2Rx8 organisation using major OEM chips for stable compatibility

Purpose-built kit

This 96GB kit contains two 48GB DDR5 ECC UDIMM modules rated at 5600MHz with CL46 latency and 1.1V operation. It is an exact-match upgrade for the Supermicro X14SAE-F motherboard that requires unbuffered ECC memory in a 2Rx8 configuration. The modules deliver error-correcting reliability for workloads that cannot tolerate silent data corruption.

Straightforward installation

The 288-pin UDIMM form factor slots directly into the board without adapters or special tools. Because the kit matches the motherboard's population rules, the system recognises the full capacity at rated speed on first boot. Builders must still consult the system manual for the approved DIMM order and any BIOS settings before installing.

Suited for ECC-dependent workloads

This memory serves users running Supermicro X14SAE-F platforms that demand unbuffered ECC at DDR5-5600 specifications. It is not intended for systems that require registered DIMMs, SODIMM form factors, or non-ECC memory. Buyers needing different capacities, speeds, or form factors should verify their board's qualified vendor list before purchasing.

Põhijooned

  • 96 GB total capacity from two 48 GB modules for high-density workloads
  • DDR5-5600 speed with CL46 latency and 1.1 V operation for efficient throughput
  • ECC protection detects and corrects single-bit errors to prevent silent data corruption
  • 288-pin unbuffered UDIMM form factor matches Supermicro X14SAE-F motherboard requirements
  • Dual-rank 2Rx8 organisation using major OEM chips for stable compatibility

Tehnilised andmed

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 ECC Unbuffered UDIMM Memory
Part NumberME44800-4828K2
Capacity96GB (2 x 48GB)
Type288-Pin DDR5 ECC UDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC Unbuffered UDIMM Motherboard Compatible
Package Content96GB 2X48GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC UDIMM KIT

Selle mudeli teised versioonid

5 veel samast sarjast

Sama seeria, erinev mälumaht, jahutus või taktsagedus — võrrelge enne otsustamist.

Küsimused selle toote kohta

How can I verify the kit is running at DDR5 5600 CL46 1.1V after installation?

Check the BIOS memory information or a tool like CPU-Z; it should show 5600 MT/s, CL46 timings, 1.10 V, 2Rx8 organisation and ECC enabled for both 48 GB modules.

What is included in the package and do I need any extra parts?

The box contains the 96 GB kit as two 48 GB 288-pin DDR5 ECC UDIMM modules; no heat spreaders, cables or additional hardware are supplied or required.

Which capacity or version of this NEMIX RAM kit should I choose for my Supermicro X14SAE-F?

This 96 GB (2×48 GB) DDR5-5600 ECC UDIMM kit is the exact-match part number ME44800-4828K2 validated for the X14SAE-F; other capacities or RDIMM/SODIMM versions are not compatible.

Veel samast osakonnast

Kliendid võrdlesid neid ka

Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.