BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 $
0.00276796BTC
Laos
NEMIX RAM
NEMIX RAM MR51200-328K16 512GB 16x32GB DDR5 6400MHz CL52 1.1V 2Rx8 ECC Registered RDIMM memory upgrade
A 512GB server memory kit with sixteen 32GB DDR5-6400 registered ECC modules at 1.1V CL52, validated for the Supermicro H14DST-F motherboard
- Capacity512GB (16 x 32GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- 512 GB total capacity from sixteen 32 GB modules for maximum server density
- DDR5 6400 MHz speed with CL52 latency delivers rated bandwidth
- Registered ECC architecture offloads the controller and corrects single-bit errors
- 10 V operation at 2Rx8 rank matches the motherboard memory controller
- Verified 288-pin RDIMM fitment for the Supermicro H14DST-F motherboard
Capacity and fit
This kit delivers 512GB of DDR5 memory across 16 modules of 32GB each, built to the 288-pin RDIMM form factor required by the Supermicro H14DST-F motherboard. Registered ECC architecture matches the board's memory controller expectations for full-capacity recognition at DDR5-6400 speeds. Builders using other motherboards or UDIMM-only platforms cannot use these modules.
Thermals and power
Each module operates at 1.1V without a heat spreader, relying on server chassis airflow for cooling. The registered design reduces electrical load on the memory controller when all 16 slots are populated, helping maintain stable operation at the rated CL52 latency. Systems with restricted airflow or passive cooling may not dissipate heat effectively at full population.
What the kit changes
The exact-match rank, voltage and timing eliminate manual configuration so the server boots at rated speed immediately. ECC corrects single-bit errors on the fly to prevent silent data corruption and unplanned reboots in production workloads. Buyers who need a different capacity, a non-ECC kit, or modules with integrated heat spreaders must select another product.
Põhijooned
- 512 GB total capacity from sixteen 32 GB modules for maximum server density
- DDR5 6400 MHz speed with CL52 latency delivers rated bandwidth
- Registered ECC architecture offloads the controller and corrects single-bit errors
- 10 V operation at 2Rx8 rank matches the motherboard memory controller
- Verified 288-pin RDIMM fitment for the Supermicro H14DST-F motherboard
Tehnilised andmed
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-328K16 |
| Capacity | 512GB (16 x 32GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 512GB 16X32GB DDR5 6400MHz PC5-51200 2Rx8 1.1V 288-PIN ECC RDIMM KIT |
Küsimused selle toote kohta
How do I install the 16 DDR5 RDIMM modules into the Supermicro H14DST-F, and which population rule is most often missed?
Power down the server and follow the motherboard manual's exact slot order; the 2Rx8 registered DIMMs must fill every channel in the sequence shown or the system will not recognise the full 512 GB capacity.
What maintenance or replacement will this 512 GB DDR5 kit need during its service life?
The modules have no heat spreaders and no moving parts, so no scheduled maintenance is required; only a failed DIMM would need replacement under the lifetime warranty.
What limit appears first when all 16 modules run sustained workloads at 6400 MHz?
The registered buffer and 1.1 V operation keep the memory controller stable, so the first bottleneck is the CPU's memory-controller bandwidth ceiling, not the DIMMs themselves.
Veel samast osakonnast
Kliendid võrdlesid neid ka
Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.
