Me võtame vastu krüptoraha — nii saab teie hoitav krüptoraha osta päris riistvara.Makske krüptorahaga, kulutage seda päris riistvarale. Tasuta kindlustatud tarne kogu maailmas, üle 399 $. Lihtsad, kaubamärgita väliskarbid, saadetud Saksamaalt.Tasuta kindlustatud tarne üle 399 $. Teie kurss lukustatakse 30 minutiks kohe, kui kassa avaneb.Kurss lukustatud 30 minutiks. Iga toode on pitseeritud, selle seerianumber on kontrollitud ja sellel kehtib 24-kuuline garantii.Pitseeritud, 24-kuulise garantiiga.

Hinnavaatlus Logi sisse
Two bare green DDR5 RDIMM modules, 288 pins each, no heat spreader

NEMIX RAM

NEMIX RAM MR51200-328K2 64GB (2×32GB) DDR5-6400 CL52 1.1V ECC RDIMM memory upgrade

SKU CH-AEDA-A8J5X

64 GB DDR5-6400 ECC registered DIMM kit (2 × 32 GB, CL52, 1.1 V) validated for the Gigabyte MZ33-CP1 motherboard

  • Capacity64GB (2 x 32GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes

Size 64GB 2X32GB

Näita veel 24 konfiguratsiooni
  • 64GB capacity in a matched 2×32GB kit for full server population
  • DDR5-6400 speed with CL52 latency delivers rated bandwidth out of the box
  • 1V operation reduces power draw while maintaining stability
  • Registered ECC RDIMM architecture corrects single-bit errors and offloads the memory controller
  • Verified compatibility with the GIGABYTE MZ33-CP1 motherboard and 288-pin DDR5 slot requirement

Exact-match DDR5-6400 ECC RDIMM kit

This 64 GB kit contains two 32 GB DDR5-6400 registered ECC modules built to the 288-pin RDIMM form factor. It is validated for the GIGABYTE MZ33-CP1 motherboard and uses 2Rx8 Samsung Micron or Hynix chips running at 1.1 V with CL52 latency.

Registered DDR5 population limits

Registered architecture buffers the command bus so every slot can be populated without signal degradation, but the motherboard still enforces a maximum total capacity and a specific slot-filling order. Exceeding the board's approved DIMM count or ignoring the population sequence will prevent the system from posting at the rated 6400 MT/s speed.

Upgrade from non-ECC or lower-speed DDR5

Replacing unbuffered non-ECC DIMMs or slower registered modules eliminates single-bit error risk and restores full bandwidth when all channels are filled. The jump is worthwhile when the workload demands continuous uptime and the platform's qualified-vendor list includes this exact part number.

Põhijooned

  • 64GB capacity in a matched 2×32GB kit for full server population
  • DDR5-6400 speed with CL52 latency delivers rated bandwidth out of the box
  • 1V operation reduces power draw while maintaining stability
  • Registered ECC RDIMM architecture corrects single-bit errors and offloads the memory controller
  • Verified compatibility with the GIGABYTE MZ33-CP1 motherboard and 288-pin DDR5 slot requirement

Tehnilised andmed

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-328K2
Capacity64GB (2 x 32GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemGIGABYTE
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content64GB 2X32GB DDR5 6400MHz PC5-51200 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Selle mudeli teised versioonid

5 veel samast sarjast

Sama seeria, erinev mälumaht, jahutus või taktsagedus — võrrelge enne otsustamist.

Küsimused selle toote kohta

Should I choose the 2×32 GB kit or a different capacity for the GIGABYTE MZ33-CP1?

The kit provides 64 GB total as two 32 GB modules, matching the board's DDR5-6400 RDIMM slot population rules; consult the motherboard manual for approved DIMM order and maximum supported capacity before buying.

What does the DDR5-6400 rating mean once the modules are installed in the server?

The memory controller will run the RDIMMs at 6400 MT/s with CL52 latency at 1.1 V, delivering the rated PC5-51200 bandwidth when all slots are populated per the board's configuration guide.

How does the 288-pin RDIMM interface and registered ECC design affect real-world operation?

The registered buffer reduces electrical load on the controller so every slot runs at full speed, while ECC corrects single-bit errors on the fly to prevent silent data corruption and unplanned reboots.

Veel samast osakonnast

Kliendid võrdlesid neid ka

Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.