Me võtame vastu krüptoraha — nii saab teie hoitav krüptoraha osta päris riistvara.Makske krüptorahaga, kulutage seda päris riistvarale. Tasuta kindlustatud tarne kogu maailmas, üle 399 $. Lihtsad, kaubamärgita väliskarbid, saadetud Saksamaalt.Tasuta kindlustatud tarne üle 399 $. Teie kurss lukustatakse 30 minutiks kohe, kui kassa avaneb.Kurss lukustatud 30 minutiks. Iga toode on pitseeritud, selle seerianumber on kontrollitud ja sellel kehtib 24-kuuline garantii.Pitseeritud, 24-kuulise garantiiga.

Hinnavaatlus Logi sisse
Black 40 mm ball bearing fan 45 by 40 by 10 mm two wire 12 V 0.14 A

OEM Industries

OEM Industries YM1204PFGB1 40mm Ball Bearing CPU Cooler

SKU CH-HMGT-1A7X1

A 40 mm ball-bearing fan with a 12 V 0.14 A two-wire connector for compact CPU cooling

  • ColorBlack
  • TypeFan only
  • Fan Size40mm
  • Bearing TypeBall
  • Power Connector2 Pin
  • LEDNo
  • Ball-bearing design reduces friction for longer service life
  • 40 mm frame fits tight small-form-factor builds
  • 12 V 0.14 A draw keeps power consumption low
  • Two-pin connector enables simple motherboard hookup
  • 10 mm slim profile clears low-profile memory modules

Compact 40 mm CPU cooler for tight builds

This 40 mm ball-bearing fan mounts directly onto low-profile heatsinks or slim chassis where larger coolers cannot fit. It targets system integrators and hobbyists who need a drop-in replacement for small-form-factor desktops, embedded boards or rack units with restricted vertical clearance.

Ball bearing thermals and low current draw

Dual ball bearings keep the rotor stable at 12 V while drawing only 0.14 A, so heat output from the motor itself stays minimal. The two-pin connector supplies constant voltage, meaning speed and airflow remain steady without PWM cycling that can add audible whine in quiet environments.

Replaces worn 4010 fans in legacy and embedded gear

Swapping a failed sleeve-bearing unit for this ball-bearing model restores reliable airflow without redesigning the mounting pattern. The upgrade is worth it when the original fan has developed rattle or seized, especially in always-on appliances where bearing longevity matters more than peak cooling capacity.

Põhijooned

  • Ball-bearing design reduces friction for longer service life
  • 40 mm frame fits tight small-form-factor builds
  • 12 V 0.14 A draw keeps power consumption low
  • Two-pin connector enables simple motherboard hookup
  • 10 mm slim profile clears low-profile memory modules

Tehnilised andmed

ModelYM1204PFGB1
ColorBlack
TypeFan only
Fan Size40mm
Bearing TypeBall
Power Connector2 Pin
LEDNo

Küsimused selle toote kohta

How do I install the YM1204PFGB1 40mm fan and what step is often missed?

Mount the 45×40×10 mm frame using the four corner holes, connect the 2-pin lead to a 12 V header, and verify the airflow arrow points toward the heatsink — the polarity of the two wires is the step most often reversed.

What maintenance will the ball-bearing fan need over time?

The dual ball bearings are sealed and require no lubrication; plan to remove dust from the blades and frame every 6–12 months with compressed air to keep airflow at spec.

What limit appears first when the fan runs continuously at 12 V 0.14 A?

The 2-wire design has no speed feedback, so the motherboard cannot detect a stall — the first sign of wear is usually a rise in bearing noise or a drop in RPM that goes unreported.

Veel samast osakonnast

Kliendid võrdlesid neid ka

Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.