Me võtame vastu krüptoraha — nii saab teie hoitav krüptoraha osta päris riistvara.Makske krüptorahaga, kulutage seda päris riistvarale. Tasuta kindlustatud tarne kogu maailmas, üle 399 $. Lihtsad, kaubamärgita väliskarbid, saadetud Saksamaalt.Tasuta kindlustatud tarne üle 399 $. Teie kurss lukustatakse 30 minutiks kohe, kui kassa avaneb.Kurss lukustatud 30 minutiks. Iga toode on pitseeritud, selle seerianumber on kontrollitud ja sellel kehtib 24-kuuline garantii.Pitseeritud, 24-kuulise garantiiga.

Hinnavaatlus Logi sisse
Green rectangular circuit board with gold edge connector and black memory chips, no heat spreader

OWC

OWC 128GB DDR4 2666 ECC Registered DIMM 8Rx4 288-pin 1.2V CL19 memory upgrade

SKU CH-S0ES-CTMCA

A 128GB DDR4 2666 ECC registered DIMM for Fujitsu PRIMERGY RX4770 M4, RX2530 M4, RX2540 M4, CX2560 M4 and CX2570 M4 servers

  • Capacity128GB
  • Type288-Pin DDR4 ECC RDIMM
  • SpeedDDR4 2666 (PC4 21300)
  • CAS LatencyCL19
  • Voltage1.2V
  • ECCYes

Capacity 128GB

  • 128 GB capacity expands server memory headroom
  • ECC registered design protects data integrity in critical workloads
  • DDR4 2666 MHz speed matches Fujitsu PRIMERGY specifications
  • 2 V operation reduces power draw per module
  • Compatible with PRIMERGY RX4770 M4 and RX2530 M4 systems

Server Memory Upgrade

This single 128GB DDR4 2666 module is an ECC registered DIMM built for Fujitsu PRIMERGY servers. It runs at 1.2V with CL19 latency and an 8Rx4 organisation across 288 pins. The part replaces Fujitsu numbers S26361-F4026-E328 and related codes.

Workstation and Server Builders

The module suits administrators expanding memory in RX4770 M4, RX2530 M4, RX2540 M4, CX2560 M4 or CX2570 M4 systems. It will not work in standard desktop PCs, nor can it be mixed with unbuffered or load-reduced ECC memory.

Registered ECC Architecture

Registered ECC operation is the decisive specification; the module only functions in platforms that support registered error-correcting memory. Systems requiring unbuffered or non-ECC DIMMs cannot use this part.

Põhijooned

  • 128 GB capacity expands server memory headroom
  • ECC registered design protects data integrity in critical workloads
  • DDR4 2666 MHz speed matches Fujitsu PRIMERGY specifications
  • 2 V operation reduces power draw per module
  • Compatible with PRIMERGY RX4770 M4 and RX2530 M4 systems

Tehnilised andmed

BrandOWC
Part Number2R6D48R4128G
Capacity128GB
Type288-Pin DDR4 ECC RDIMM
SpeedDDR4 2666 (PC4 21300)
CAS LatencyCL19
Voltage1.2V
ECCYes
Buffered/RegisteredRegistered
Rank8Rx4
Heat SpreaderNo
Compatible SystemFujitsu PRIMERGY RX4770 M4
Fujitsu PRIMERGY CX2560 M4
Fujitsu PRIMERGY CX2570 M4
Fujitsu PRIMERGY RX2530 M4
Fujitsu PRIMERGY RX2540 M4

Selle mudeli teised versioonid

5 veel samast sarjast

Sama seeria, erinev mälumaht, jahutus või taktsagedus — võrrelge enne otsustamist.

Küsimused selle toote kohta

Will the 8Rx4 registered DIMM need any firmware updates or periodic reseating after installation?

No firmware updates or scheduled reseating are required; the module is a standard JEDEC DDR4 2666 CL19 1.2V registered ECC DIMM that operates within the server's normal memory management.

What thermal or power limit appears first when the 128GB module runs at full load continuously?

The module draws 1.2V with no heat spreader, so the platform's DIMM-slot airflow and power budget set the practical ceiling before the memory itself throttles.

How much extra heat and fan noise does a single 128GB 2666 CL19 1.2V registered DIMM add during 24/7 operation?

At 1.2V without a heat spreader the incremental thermal load is small; the server's existing cooling curve typically absorbs it without raising fan speeds.

Veel samast osakonnast

Kliendid võrdlesid neid ka

Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.