SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
391,99 $
0.00501112BTC
Laos
OWC
OWC 128GB DDR4 3200 CL22 8Rx4 288-pin 1.2V ECC Registered RDIMM memory upgrade
A single 128GB DDR4 3200 ECC registered RDIMM for ASRock server motherboards including SPC621D8U-2T
- Capacity128GB
- Type288-Pin DDR4 ECC RDIMM
- SpeedDDR4 3200 (PC4 25600)
- CAS Latency22
- Voltage1.2V
- ECCYes
- 128 GB single-module capacity simplifies high-density server upgrades
- ECC registered design detects and corrects data errors for workload reliability
- JEDEC-standard DDR4 3200 CL22 at 1.2 V ensures broad platform compatibility
- Backward compatible with 2133, 2400, 2666 and 2933 MHz speeds
- Validated for ASRock SPC621D8U-2T and SP2C621D16 series motherboards
Server Memory Upgrade
This 128GB DDR4 ECC Registered RDIMM is built for ASRock server motherboards including the SPC621D8U-2T and SP2C621D16 series. It targets administrators expanding capacity in workstations, servers or NAS systems that require registered error-correcting memory. The single-module design simplifies slot population on compatible platforms.
Sustained Workload Behaviour
Operating at DDR4 3200 with CL22 latency and 1.2V, the module maintains JEDEC-standard timing during continuous operation. Registered buffering reduces electrical load on the memory controller, helping stability when all channels are populated. Backward compatibility with 2133, 2400, 2666 and 2933MHz buses allows deployment in mixed-speed configurations without manual down-clocking.
Build and Installation Notes
The 288-pin form factor fits standard DDR4 RDIMM slots on the listed ASRock boards. No heat spreader is fitted, so airflow across the PCB is unimpeded in dense server chassis. The module cannot be mixed with unbuffered or load-reduced DIMMs, and it will not function in standard desktop systems that lack registered memory support.
Põhijooned
- 128 GB single-module capacity simplifies high-density server upgrades
- ECC registered design detects and corrects data errors for workload reliability
- JEDEC-standard DDR4 3200 CL22 at 1.2 V ensures broad platform compatibility
- Backward compatible with 2133, 2400, 2666 and 2933 MHz speeds
- Validated for ASRock SPC621D8U-2T and SP2C621D16 series motherboards
Tehnilised andmed
| Brand | OWC |
|---|---|
| Part Number | 3R2D48R4128G |
| Capacity | 128GB |
| Type | 288-Pin DDR4 ECC RDIMM |
| Speed | DDR4 3200 (PC4 25600) |
| CAS Latency | 22 |
| Voltage | 1.2V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 8Rx4 |
| Heat Spreader | No |
| Compatible System | ASRock Server Motherboard SPC621D8U-2T ASRock Server Motherboard SP2C621D16-2T ASRock Server Motherboard SP2C621D16-2T/X550 ASRock Server Motherboard SP2C621D16HM3 ASRock Server Motherboard SP2C621D16N-2L2T |
Küsimused selle toote kohta
How much power does the 128GB DDR4 3200 CL22 8Rx4 module draw at its rated 1.2V during sustained server workloads?
The module operates at the standard DDR4 voltage of 1.2V. Power draw scales with the 128GB capacity and 8Rx4 organisation, so sustained server loads will consume more watts than lower-density DIMMs, but the voltage remains fixed at 1.2V.
Which motherboard features must my system already provide for this 288-pin ECC Registered RDIMM to function?
Your motherboard must support DDR4 ECC Registered memory in a 288-pin DIMM slot, accept 8Rx4 modules, and run at 1.2V. The listed ASRock SPC621D8U-2T and SP2C621D16 series boards meet these requirements.
Will this 3200MHz CL22 8Rx4 RDIMM run reliably alongside older 2666MHz or 2933MHz ECC Registered DIMMs I keep in the same server?
Yes. The module is backward compatible with 2133MHz, 2400MHz, 2666MHz and 2933MHz speeds. When mixed, all DIMMs will operate at the lowest common speed and the tightest shared timings.
Veel samast osakonnast
Kliendid võrdlesid neid ka
Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.
