Me võtame vastu krüptoraha — nii saab teie hoitav krüptoraha osta päris riistvara.Makske krüptorahaga, kulutage seda päris riistvarale. Tasuta kindlustatud tarne kogu maailmas, üle 399 $. Lihtsad, kaubamärgita väliskarbid, saadetud Saksamaalt.Tasuta kindlustatud tarne üle 399 $. Teie kurss lukustatakse 30 minutiks kohe, kui kassa avaneb.Kurss lukustatud 30 minutiks. Iga toode on pitseeritud, selle seerianumber on kontrollitud ja sellel kehtib 24-kuuline garantii.Pitseeritud, 24-kuulise garantiiga.

Hinnavaatlus Logi sisse

OWC

OWC 16GB (4x4GB) DDR3 1866 ECC Unbuffered UDIMM Kit

SKU CH-KGCH-XDSRM

16 GB kit of four 4 GB DDR3 1866 ECC unbuffered UDIMMs at CL13 for desktops, workstations and servers

  • Capacity16GB (4 x 4GB)
  • SpeedDDR3 1866 (PC3 14900)
  • CAS LatencyCL13
  • Voltage1.5V
  • ECCYes
  • Buffered/RegisteredUnbuffered
  • ECC protection guards data integrity in critical workloads
  • 16 GB kit (4 × 4 GB) expands multitasking headroom
  • DDR3 1866 CL13 delivers responsive throughput at 1.5 V
  • JEDEC-standard, RoHS-compliant modules ensure warranty-safe upgrades
  • 240-pin unbuffered UDIMM fits select desktops, workstations and servers

16GB DDR3 ECC UDIMM kit

This 16GB kit contains four 4GB DDR3 1866 modules rated at PC3-14900 CL13. ECC unbuffered operation suits workstations, servers and NAS systems that require error-correcting memory. JEDEC-standard 1.5V voltage ensures broad compatibility with supported desktop and server platforms. The black modules ship without heat spreaders.

Straightforward DIMM installation

Each 240-pin DIMM seats in a standard DDR3 UDIMM slot; no tools beyond opening the chassis are required. Because the kit is unbuffered, populate slots according to the motherboard manual to enable dual-channel operation. Mixing with non-ECC or registered DIMMs will prevent boot or disable error correction. Verify that all four modules are recognised at 1866 MHz after seating.

Confirm DDR3 ECC unbuffered support

Check that the target system accepts DDR3 ECC unbuffered UDIMMs at 1.5V and can run four ranks per channel if fully populated. The motherboard or server documentation must list PC3-14900 or 1866 MHz as a supported speed. Ensure the BIOS is current enough to initialise the full 16GB capacity. Do not order for platforms that require registered or load-reduced memory.

Põhijooned

  • ECC protection guards data integrity in critical workloads
  • 16 GB kit (4 × 4 GB) expands multitasking headroom
  • DDR3 1866 CL13 delivers responsive throughput at 1.5 V
  • JEDEC-standard, RoHS-compliant modules ensure warranty-safe upgrades
  • 240-pin unbuffered UDIMM fits select desktops, workstations and servers

Tehnilised andmed

BrandOWC
Part Number1E8D31R8016S
Capacity16GB (4 x 4GB)
SpeedDDR3 1866 (PC3 14900)
CAS LatencyCL13
Voltage1.5V
ECCYes
Buffered/RegisteredUnbuffered
Multi-channel KitDual Channel Kit
ColorBlack
Heat SpreaderNo
Recommend UseWorkstations, Servers, and NAS Systems
LED ColorNone

Selle mudeli teised versioonid

5 veel samast sarjast

Sama seeria, erinev mälumaht, jahutus või taktsagedus — võrrelge enne otsustamist.

Küsimused selle toote kohta

How can I verify the kit is running at 1866 MHz with CL13 after installation?

Open the BIOS or UEFI on first boot and confirm the memory frequency reads 1866 MHz and the CAS latency shows 13; CPU-Z or a similar tool inside the OS will report the same figures.

What exactly ships in the box and is anything else required?

The package contains four 4 GB DDR3 240-pin UDIMM modules for a total of 16 GB; no cables, brackets or additional parts are included or needed for installation.

Which capacity or speed version should I choose for a dual-channel workstation?

This 16 GB kit (4 × 4 GB) at 1866 MHz CL13 1.5 V ECC unbuffered is the only version listed; select it when your board supports DDR3 ECC UDIMMs and you want 16 GB in a dual-channel configuration.

Veel samast osakonnast

Kliendid võrdlesid neid ka

Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.