Me võtame vastu krüptoraha — nii saab teie hoitav krüptoraha osta päris riistvara.Makske krüptorahaga, kulutage seda päris riistvarale. Tasuta kindlustatud tarne kogu maailmas, üle 399 $. Lihtsad, kaubamärgita väliskarbid, saadetud Saksamaalt.Tasuta kindlustatud tarne üle 399 $. Teie kurss lukustatakse 30 minutiks kohe, kui kassa avaneb.Kurss lukustatud 30 minutiks. Iga toode on pitseeritud, selle seerianumber on kontrollitud ja sellel kehtib 24-kuuline garantii.Pitseeritud, 24-kuulise garantiiga.

Hinnavaatlus Logi sisse
Green printed circuit board with black memory chips, gold edge connector, thin rectangular SODIMM module

OWC

OWC 4GB DDR4 2400MHz CL17 1.2V 260pin SODIMM for HP ProDesk 400 G3 Mini 600 G3 Mini

SKU CH-42YM-N9DZH

4GB DDR4 2400MHz CL17 1.2V SODIMM upgrades HP ProDesk 400 G3 Mini and 600 G3 Mini systems

  • Capacity4GB
  • Type260-Pin DDR4 Non-ECC SODIMM
  • SpeedDDR4 2400 (PC4 19200)
  • CAS LatencyCL17
  • Voltage1.2V
  • ECCNo
  • 4GB DDR4 boosts multitasking on HP ProDesk Mini
  • 2400 MHz CL17 speed matches system specs exactly
  • 2 V low voltage keeps power draw minimal
  • JEDEC compliant 260-pin SODIMM fits without modification
  • Tested for HP ProDesk 400 G3 and 600 G3 Mini

Compatible HP ProDesk Mini Upgrade

This OWC 4 GB DDR4 SODIMM is built for the HP ProDesk 400 G3 Mini and 600 G3 Mini. It follows JEDEC specifications and runs at 1.2 V. The module is a direct fit for those compact desktops.

Suitable for Single-Slot Expansion

The kit suits owners of the listed Mini models who have a free slot and want a modest capacity increase. It will not help buyers who need more storage or who require ECC protection for data integrity.

Speed and Timing Decide Fit

The stick operates at DDR4 2400 with a CAS latency of CL17. Matching this speed and timing is the specification that determines whether the upgrade works correctly in the target systems.

Põhijooned

  • 4GB DDR4 boosts multitasking on HP ProDesk Mini
  • 2400 MHz CL17 speed matches system specs exactly
  • 2 V low voltage keeps power draw minimal
  • JEDEC compliant 260-pin SODIMM fits without modification
  • Tested for HP ProDesk 400 G3 and 600 G3 Mini

Tehnilised andmed

BrandOWC
Part Number2S4D41R804GB
Capacity4GB
Type260-Pin DDR4 Non-ECC SODIMM
SpeedDDR4 2400 (PC4 19200)
CAS LatencyCL17
Voltage1.2V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
Heat SpreaderNo
Compatible SystemHP ProDesk 400 G3 Mini
HP ProDesk 600 G3 Mini

Selle mudeli teised versioonid

5 veel samast sarjast

Sama seeria, erinev mälumaht, jahutus või taktsagedus — võrrelge enne otsustamist.

Küsimused selle toote kohta

What motherboard slot must my HP ProDesk 400 G3 Mini have free to accept this 260-pin DDR4 SODIMM?

The system needs an open DDR4 SODIMM slot; this module uses the standard 260-pin layout that fits the ProDesk 400 G3 Mini and 600 G3 Mini memory sockets.

If I keep the original memory in my ProDesk 600 G3 Mini, will this CL17 2400 MHz stick run at its rated speed?

The module is rated DDR4 2400 PC4-19200 CL17; when mixed with existing RAM the system will clock all modules to the lowest common speed and latency.

How can I confirm the new 4 GB module is recognised at 2400 MHz after installation?

Open Task Manager or BIOS and verify the installed memory shows 4 GB running at 2400 MHz with CL17 timings.

Veel samast osakonnast

Kliendid võrdlesid neid ka

Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.