BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 $
0.00276796BTC
Laos
OWC
OWC 4GB DDR4 2666 CL19 260-pin SODIMM for QNAP TS-1253DU-RP
4GB DDR4 2666MHz CL19 SODIMM validated for QNAP TS-1253DU-RP NAS upgrades
- Capacity4GB
- Type260-Pin DDR4 Non-ECC SODIMM
- SpeedDDR4 2666 (PC4 21300)
- CAS LatencyCL19
- Voltage1.2V
- ECCNo
- 4GB DDR4 2666 CL19 SODIMM expands QNAP TS-1253DU-RP memory capacity
- JEDEC-standard PC4-21300 module ensures warranty-safe NAS upgrade
- Low 1.2V DDR4 voltage reduces system power draw
- Backward compatible with 2400MHz and 2133MHz DDR4 speeds
- 260-pin unbuffered non-ECC design fits QNAP TS-1253DU-RP slot
Targeted NAS Memory Upgrade
This OWC module is a 4GB DDR4 2666 SODIMM built specifically for the QNAP TS-1253DU-RP. It replaces the original QNAP part numbers RAM-4GDR4A0-SO-2666, RAM-4GDR4T0-SO-2666 and RAM-4GDR4T1-SO-2666. Buyers needing ECC error correction or higher capacity modules should look elsewhere.
Straightforward Slot Installation
The 260-pin SODIMM inserts directly into the NAS memory slot without tools. Because it is an unbuffered, non-ECC 1Rx8 design at 1.2V, it meets the JEDEC standard for the platform. Installers must ensure the system is fully powered down and disconnected before opening the chassis.
2666 MT/s Speed Rating
The decisive specification is the DDR4 2666 (PC4-21300) CL19 speed grade. The module is backward compatible with 2400 and 2133 MHz bus speeds if the system requires it. This exact speed rating determines whether the NAS will recognise and run the memory at its rated performance.
Põhijooned
- 4GB DDR4 2666 CL19 SODIMM expands QNAP TS-1253DU-RP memory capacity
- JEDEC-standard PC4-21300 module ensures warranty-safe NAS upgrade
- Low 1.2V DDR4 voltage reduces system power draw
- Backward compatible with 2400MHz and 2133MHz DDR4 speeds
- 260-pin unbuffered non-ECC design fits QNAP TS-1253DU-RP slot
Tehnilised andmed
| Brand | OWC |
|---|---|
| Part Number | 2S6D41R804GB |
| Capacity | 4GB |
| Type | 260-Pin DDR4 Non-ECC SODIMM |
| Speed | DDR4 2666 (PC4 21300) |
| CAS Latency | CL19 |
| Voltage | 1.2V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Rank | 1Rx8 |
| Heat Spreader | No |
| Compatible System | QNAP TS-1253DU-RP |
Küsimused selle toote kohta
How do I confirm the 2666 CL19 module is running correctly in my TS-1253DU-RP after installation?
Check the NAS system information page; it should show 4 GB DDR4 at 2666 MHz with CL19 timing and 1.2 V operation.
What comes in the box and do I need any extra parts for the TS-1253DU-RP?
The package contains one 4 GB 260-pin DDR4 SODIMM; no additional components or tools are required for this NAS.
Which capacity should I choose for the TS-1253DU-RP upgrade?
This listing is a single 4 GB module; select it if your TS-1253DU-RP has a free slot and you need a 4 GB increase.
Veel samast osakonnast
Kliendid võrdlesid neid ka
Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.
