Me võtame vastu krüptoraha — nii saab teie hoitav krüptoraha osta päris riistvara.Makske krüptorahaga, kulutage seda päris riistvarale. Tasuta kindlustatud tarne kogu maailmas, üle 399 $. Lihtsad, kaubamärgita väliskarbid, saadetud Saksamaalt.Tasuta kindlustatud tarne üle 399 $. Teie kurss lukustatakse 30 minutiks kohe, kui kassa avaneb.Kurss lukustatud 30 minutiks. Iga toode on pitseeritud, selle seerianumber on kontrollitud ja sellel kehtib 24-kuuline garantii.Pitseeritud, 24-kuulise garantiiga.

Hinnavaatlus Logi sisse
Aluminium M.2 SSD enclosure with RGB lighting

Sabrent

Sabrent Rocket RGB USB-C 20Gbps M.2 SATA/NVMe Enclosure Special Edition

SKU CH-QGAS-D1YTV

An aluminum M.2 SATA and NVMe enclosure delivering 20 Gbps over USB 3.2 with tool-less installation, thermal padding and status RGB

  • Color5 Pack Mutli-Colors
  • SizeM.2
  • TypeEnclosure
  • MaterialAluminum
  • Internal InterfaceM.2 NVME M-Key
  • External InterfaceUSB 3.2
  • Supports both SATA and NVMe M.2 SSDs for flexible storage upgrades
  • Up to 20Gbps transfer speed with USB 3.2 Gen 2x2 host ports
  • Tool-less M.2 fastener enables quick drive installation without tiny screws
  • Aluminum body with thermal padding dissipates heat from high-performance SSDs
  • RGB status lighting shows drive activity and adds desktop illumination

Versatile M.2 SATA and NVMe Enclosure

The Sabrent Rocket RGB USB-C enclosure accepts both M.2 SATA and NVMe SSDs in 2230, 2242, 2260 and 2280 form factors. It connects through a USB 3.2 Gen 2x2 port at up to 20Gbps and remains bus-powered for plug-and-play use. TRIM and UASP support are included for broad compatibility.

Sustained Thermal Management

An aluminium exterior works with built-in thermal padding to dissipate heat during extended transfers. The tool-less M.2 fastener secures drives without a separate screw, so the thermal path stays consistent. RGB lighting shifts with drive status, giving a visual cue when the enclosure is under heavy load.

Upgrade From 10Gbps Enclosures

This model doubles the interface ceiling to 20Gbps compared to the earlier 10Gbps design, so the jump is worthwhile when the host system has a USB 3.2 Gen 2x2 port. It does not add a fan or external power, so builders who need active cooling or multi-bay capacity should look elsewhere.

Põhijooned

  • Supports both SATA and NVMe M.2 SSDs for flexible storage upgrades
  • Up to 20Gbps transfer speed with USB 3.2 Gen 2x2 host ports
  • Tool-less M.2 fastener enables quick drive installation without tiny screws
  • Aluminum body with thermal padding dissipates heat from high-performance SSDs
  • RGB status lighting shows drive activity and adds desktop illumination

Tehnilised andmed

BrandSABRENT
ModelM.2 SSD Enclosure
Color5 Pack Mutli-Colors
SizeM.2
TypeEnclosure
MaterialAluminum
Internal InterfaceM.2 NVME M-Key
External InterfaceUSB 3.2
HDD Count SupportedSingle SSD
Maximum Capacity (per Bay)More than 16TB
FanNo
PowerNo
Sports Team1 Piece

Küsimused selle toote kohta

Does the aluminum body and thermal padding keep an NVMe drive cool during all-day transfers without a fan?

The aluminum enclosure and built-in thermal padding dissipate heat passively; there is no fan, so sustained loads rely on the case surface to stay within safe temperatures.

What host port and cable are needed to reach the 20Gbps ceiling?

A USB 3.2 Gen 2x2 Type-C port and the included USB-C cable are required; slower ports will fall back to lower speeds automatically.

Will my older M.2 2242 SATA SSD work alongside newer 2280 NVMe drives in this enclosure?

Yes — the tool-less M-key slot accepts 2230, 2242, 2260 and 2280 modules in both SATA and NVMe protocols, so legacy and current drives fit interchangeably.

Veel samast osakonnast

Kliendid võrdlesid neid ka

Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.