Seagate
Seagate Nytro 5550H XP3200LE70005 3.2TB 2.5" internal SSD
A 2.5 inch PCIe Gen4 NVMe SSD with 3.2TB capacity delivering 7400MB/s read and 6900MB/s write speeds for enterprise workloads
- Form Factor2.5"
- Capacity3.2TB
- 2TB capacity stores large enterprise datasets
- PCIe Gen4 x4 NVMe delivers 7400MB/s sequential read throughput
- 1,700,000 random read IOPS accelerates database queries
- 3 DWPD endurance rating supports 17,500TB total bytes written
- 5 inch 15mm form factor fits standard server bays
3.2TB PCIe Gen4 NVMe SSD
The Seagate Nytro 5550H is a 3.2TB internal solid-state drive using a PCIe Gen4 x4 NVMe interface in a 2.5 inch form factor. It delivers sustained sequential reads of 7400MB/s and writes of 6900MB/s with random read performance of 1,700,000 IOPS. Designed for read-intensive enterprise workloads, it offers a 3 drive writes per day endurance rating.
Suits write-intensive server workloads.
This drive targets servers and storage arrays needing high random read throughput and consistent low latency. Its 14.9mm height and 12V power requirement make it unsuitable for standard laptop bays or devices limited to 5V power. Buyers needing a slimmer profile or 5V operation should consider other form factors.
17,500TB total endurance rating
The drive is rated for 17,500TB written over its lifetime with a 2.5 million hour MTBF. This endurance figure determines whether the drive meets the write demands of a specific deployment. A five-year limited warranty covers the hardware.
Põhijooned
- 2TB capacity stores large enterprise datasets
- PCIe Gen4 x4 NVMe delivers 7400MB/s sequential read throughput
- 1,700,000 random read IOPS accelerates database queries
- 3 DWPD endurance rating supports 17,500TB total bytes written
- 5 inch 15mm form factor fits standard server bays
Tehnilised andmed
| Form Factor | 2.5" |
|---|---|
| Capacity | 3.2TB |
Küsimused selle toote kohta
How do I confirm the Nytro 5550H is delivering 7400 MB/s sequential read after installation?
Run a sustained 128 KB sequential read test; the drive should reach 7400 MB/s with an average read latency of 75 µs at QD1.
What ships with the XP3200LE70005 and what must I source separately?
The 3.2 TB 2.5" 15 mm drive ships alone; you must supply a U.2 or PCIe Gen4 x4 backplane, 12 V power and a 2.5" bay.
Which capacity and endurance version of the Nytro 5550H should I choose for 3 DWPD workloads?
This 3.2 TB model is rated for 3 DWPD and 17500 TB written; select it when your write volume matches those figures.
Veel samast osakonnast
Kliendid võrdlesid neid ka
Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.
