SPARTAN
SPARTAN 1-to-9 SATA HDD/SSD Duplicator H09HSHEB
- Hard Drive Duplicat…
- 1 to 9
1 504,99 $
0.01947375BTC
Laos
Seagate
Seagate ST1000NX0323 1TB 2.5" SAS 12Gb/s 7200 RPM 128MB laptop hard drive
1 TB, 2.5-inch SAS 12Gb/s drive at 7200 RPM with 128 MB cache for enterprise storage
- InterfaceSAS 12Gb/s
- Capacity1TB
- Cache128MB
- Average Latency4.16ms
- RPM7200 RPM
- FeaturesDesign Small and Deliver BIG - 2.5-Inch Nearline Drive - Up
- 1TB capacity fits space-constrained servers
- SAS 12Gb/s interface enables fast data access
- 7200 RPM spindle speed reduces average latency to 4.16ms
- 128MB cache improves burst throughput
- 15mm 2.5-inch form factor maximises storage density
Enterprise 2.5-inch SAS drive
The Seagate ST1000NX0323 is a 1TB enterprise hard drive with a 2.5-inch form factor, 15mm height and a SAS 12Gb/s interface. It spins at 7200 RPM and carries a 128MB cache for sustained throughput in nearline storage arrays. The drive is built for 24x7 operation in space-constrained data centres.
Suits high-density enterprise arrays.
This unit fits servers and storage enclosures that accept 15mm 2.5-inch SAS drives and need low power per terabyte. Buyers upgrading consumer laptops or slim workstations that only take 7mm SATA drives cannot use this model.
SAS 12Gb/s interface decides fit
The drive connects through a 12Gb/s SAS port, so the host backplane or controller must support that standard. A system with only SATA 6Gb/s connectors will not recognise the drive.
Põhijooned
- 1TB capacity fits space-constrained servers
- SAS 12Gb/s interface enables fast data access
- 7200 RPM spindle speed reduces average latency to 4.16ms
- 128MB cache improves burst throughput
- 15mm 2.5-inch form factor maximises storage density
Tehnilised andmed
| Brand | Seagate |
|---|---|
| Model | ST1000NX0323 |
| Interface | SAS 12Gb/s |
| Capacity | 1TB |
| Cache | 128MB |
| Average Latency | 4.16ms |
| RPM | 7200 RPM |
| Features | Design Small and Deliver BIG - 2.5-Inch Nearline Drive - Up to 2TB capacity in 15mm z-height, 2.5-inch form factor for space-constrained data centers - Designed for high-density storage solutions requiring environmentally sound low power consumption and low weight for maximum storage efficiency - Choose 12Gb/s SAS for high data integrity, scalability and fast data access or SATA 6Gb/s for economical nearline performance - Third-generation, enterprise-class reliability for 24x7 environmental robustness - Highest efficiency with over 50% improvement in watts/TB, and 18% sequential perf |
| Usage | For Enterprise Storage |
| Form Factor | 2.5" |
| Height (maximum) | 15mm |
| Width (maximum) | 70.10mm |
| Length (maximum) | 100.46mm |
| Tarnekaal | 0.91 kg |
| Pakendi mõõtmed | 102 × 76 × 15 mm |
Küsimused selle toote kohta
What does the SAS 12Gb/s interface cap in real-world throughput?
The SAS 12Gb/s link tops out at 12 Gbit/s; sustained sequential transfers reach 18% higher than the previous generation, while the 128 MB cache absorbs bursts before the 7200 RPM platters become the bottleneck.
What physical clearance does the 15 mm z-height drive need?
The drive measures 100.46 mm long, 70.10 mm wide and 15 mm tall, so the host bay must accommodate a 15 mm 2.5-inch form factor; many slim laptops only accept 7 mm models.
How is the drive installed, and which step is often missed?
Connect the SAS data and power connectors, secure the drive with four M3 screws, then configure the RAID controller or HBA for 4Kn sector mode; skipping the 4Kn setting causes the drive to report zero capacity.
Veel samast osakonnast
Kliendid võrdlesid neid ka
Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.
Acumen Disc
Acumen Disc H11-SATA150 1-to-11 SATA Duplicator 150MB/s
- Hard Drive Duplicat…
- 1 to 11
1 633,99 $
0.02114294BTC
Laos