Me võtame vastu krüptoraha — nii saab teie hoitav krüptoraha osta päris riistvara.Makske krüptorahaga, kulutage seda päris riistvarale. Tasuta kindlustatud tarne kogu maailmas, üle 399 $. Lihtsad, kaubamärgita väliskarbid, saadetud Saksamaalt.Tasuta kindlustatud tarne üle 399 $. Teie kurss lukustatakse 30 minutiks kohe, kui kassa avaneb.Kurss lukustatud 30 minutiks. Iga toode on pitseeritud, selle seerianumber on kontrollitud ja sellel kehtib 24-kuuline garantii.Pitseeritud, 24-kuulise garantiiga.

Hinnavaatlus Logi sisse
Silver 3.5 inch bare internal hard drive with circuit board visible

Seagate

Seagate ST33000651AS 3TB 7200 RPM 64MB SATA 6.0Gb/s 3.5" internal hard drive

SKU CH-0RYM-6PDXF MPN ST33000651AS

A 3TB 7200 RPM SATA 6.0Gb/s 3.5-inch desktop hard drive with 64MB cache for high-capacity storage

  • PackagingBare Drive
  • InterfaceSATA 6.0Gb/s
  • Capacity3TB
  • NAND Flash Memory TypeDesktop
  • RPM7200 RPM
  • Cache64MB
  • 3 TB capacity stores large media libraries
  • 7200 RPM spindle delivers fast sequential throughput
  • 64 MB cache reduces burst-transfer bottlenecks
  • SATA 6.0 Gb/s interface matches modern controllers
  • Free Disc Wizard software bypasses 2.1 TB legacy limit

Capacity and server focus

The Seagate BarraCuda XT ST33000651AS is a 3TB desktop internal hard drive built for server and high-capacity desktop workloads. Its 7200 RPM spindle speed and 64MB cache target systems that need sustained throughput for large data sets. The 3.5-inch form factor fits standard drive bays in towers and rackmount chassis.

3TB headroom and legacy limits

Three terabytes provides ample space for media libraries, backup archives and entry-level server storage pools. The drive includes Disc Wizard software to bypass the 2.1TB addressing ceiling found in older BIOS environments without extra hardware. Workloads that demand faster random access or multi-drive redundancy will reach the mechanical limits of a single spinning disk.

SATA 6.0Gb/s interface constraints

The SATA 6.0Gb/s link caps maximum sequential transfer at the interface ceiling, while average seek sits at 8.5ms and average write at 9.5ms with 4.16ms latency. Burst performance benefits from the 64MB cache, yet sustained rates remain bound by the mechanical platter speed. Systems requiring lower latency or higher IOPS must look beyond the SATA hard-drive class.

Põhijooned

  • 3 TB capacity stores large media libraries
  • 7200 RPM spindle delivers fast sequential throughput
  • 64 MB cache reduces burst-transfer bottlenecks
  • SATA 6.0 Gb/s interface matches modern controllers
  • Free Disc Wizard software bypasses 2.1 TB legacy limit

Tehnilised andmed

BrandSeagate
SeriesBarraCuda XT
ModelST33000651AS
PackagingBare Drive
InterfaceSATA 6.0Gb/s
Capacity3TB
NAND Flash Memory TypeDesktop
RPM7200 RPM
Cache64MB
Average Seek Time8.5ms
Average Write Time9.5ms
Average Latency4.16ms
FeaturesImportant Warranty Information
This product is end-of-sale and no longer warranted by the manufacturer. Instead, warranties this product for one year from date of purchase. If you require warranty service after thirty days, please contact Customer Service, not the manufacturer.
3TB of capacity easily configurable with Seagate DiscWizard software to overcome legacy capacity limits of 2.1TB with no additional hardware required.
Massive capacity meets the demands of today's storage-craving applications, such as high-performance game systems and video production systems.
SATA 6Gb/s inter
UsageIdeal for Servers
Form Factor3.5"
Tarnekaal0.68 kg
Pakendi mõõtmed146 × 102 × 25 mm

Küsimused selle toote kohta

Will the 3TB capacity work with my older motherboard that only supports drives up to 2.1TB?

Yes, the included Disc Wizard software allows the full 3TB to be configured on systems with legacy 2.1TB BIOS limits without extra hardware.

How can I verify the drive is performing correctly after installation?

Check that the drive reports 7200 RPM and a 6.0Gb/s SATA link speed in your BIOS or OS utilities; typical seek time is 8.5ms and average latency is 4.16ms.

Does the bare drive package include mounting screws or a SATA cable, or must I buy them separately?

The bare drive ships without screws, cables, or brackets; you will need to supply a SATA data cable, a SATA power connector, and 3.5" mounting hardware.

Veel samast osakonnast

Kliendid võrdlesid neid ka

Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.