Me võtame vastu krüptoraha — nii saab teie hoitav krüptoraha osta päris riistvara.Makske krüptorahaga, kulutage seda päris riistvarale. Tasuta kindlustatud tarne kogu maailmas, üle 399 $. Lihtsad, kaubamärgita väliskarbid, saadetud Saksamaalt.Tasuta kindlustatud tarne üle 399 $. Teie kurss lukustatakse 30 minutiks kohe, kui kassa avaneb.Kurss lukustatud 30 minutiks. Iga toode on pitseeritud, selle seerianumber on kontrollitud ja sellel kehtib 24-kuuline garantii.Pitseeritud, 24-kuulise garantiiga.

Hinnavaatlus Logi sisse
Silverstone 360mm AIO with three 120mm fans, nickel-plated copper block for Threadripper 7000

Silverstone

Silverstone BESST-XE360-TR5 360mm liquid cooler for Threadripper 7000 sTR5/SP6

SKU CH-AVQJ-XNKR9 MPN BESST-XE360-TR5

A 360 mm all-in-one liquid cooler with three 120 mm PWM fans up to 2 800 RPM and 87.72 CFM, built for Threadripper 7000 on sTR5/SP6

  • Nickel-plated copper block with micro-channels spreads heat across large Threadripper 7000 CPU surface
  • Pump mounted on radiator moves coolant before heat builds up, lowering temps and extending pump life
  • Three 120 mm PWM fans push up to 87.72 CFM at 2800 RPM for strong radiator airflow
  • 360 mm aluminium radiator gives ample surface area for high-output workstation processors
  • Designed specifically for AMD Threadripper 7000 series on sTR5 and SP6 sockets

Socket sTR5/SP6 workstation cooler

The Silverstone BESST-XE360-TR5 is a 360 mm all-in-one liquid cooler built for AMD Threadripper 7000 series processors on the sTR5 and SP6 platforms. It targets professional workstations that need sustained thermal control for multi-core workloads. The nickel-plated copper block uses a large micro-channel base plate to match the CPU's extensive heatspreader area.

Radiator-integrated pump layout

Unlike typical designs, the pump sits inside the radiator so coolant passes through it first, moving pump-generated heat away from the block immediately. This arrangement lowers loop temperatures during extended runs and reduces thermal stress on the pump itself. Three 120 mm PWM fans spin up to 2,800 RPM, delivering 87.72 CFM each for consistent airflow across the radiator.

Threadripper 7000 platform fit

The cooler is made specifically for the sTR5/SP6 mounting pattern and the large die area of Zen 4 Threadripper CPUs. Builders using other sockets or smaller consumer processors cannot use this unit. Compatibility with the target platform is the single specification that decides whether this is the right part.

Põhijooned

  • Nickel-plated copper block with micro-channels spreads heat across large Threadripper 7000 CPU surface
  • Pump mounted on radiator moves coolant before heat builds up, lowering temps and extending pump life
  • Three 120 mm PWM fans push up to 87.72 CFM at 2800 RPM for strong radiator airflow
  • 360 mm aluminium radiator gives ample surface area for high-output workstation processors
  • Designed specifically for AMD Threadripper 7000 series on sTR5 and SP6 sockets

Tehnilised andmed

Selle toote kohta ei ole veel tehnilisi andmeid avaldatud.

Küsimused selle toote kohta

How loud do the three 120 mm PWM fans get when the cooler runs at full speed all day?

The fans spin up to 2,800 RPM and move 87.72 CFM each, so expect noticeable but not extreme airflow noise under sustained load.

What Threadripper socket and CPU generation must I already have for this cooler to mount?

It fits AMD sTR5/SP6 sockets and is designed for Ryzen Threadripper 7000 series processors.

Will the radiator-mounted pump fit inside a typical workstation case that held an older Threadripper air cooler?

The 360 mm radiator needs three 120 mm fan slots; check your case clearance before assuming it replaces a tower heatsink.

Veel samast osakonnast

Kliendid võrdlesid neid ka

Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.