Me võtame vastu krüptoraha — nii saab teie hoitav krüptoraha osta päris riistvara.Makske krüptorahaga, kulutage seda päris riistvarale. Tasuta kindlustatud tarne kogu maailmas, üle 399 $. Lihtsad, kaubamärgita väliskarbid, saadetud Saksamaalt.Tasuta kindlustatud tarne üle 399 $. Teie kurss lukustatakse 30 minutiks kohe, kui kassa avaneb.Kurss lukustatud 30 minutiks. Iga toode on pitseeritud, selle seerianumber on kontrollitud ja sellel kehtib 24-kuuline garantii.Pitseeritud, 24-kuulise garantiiga.

Hinnavaatlus Logi sisse
Two green DDR2 DIMM sticks with gold contacts, 240 pin, 1.8V

Simmtec, Inc

Simmtec, Inc 8GB (2 x 4GB) DDR2 DIMM 240 PIN 667MHz PC2-5300/5400 1.8V

SKU CH-1CTM-N92RF

Dual-channel DDR2 kit totalling 8 GB with two 4 GB modules running at 667 MHz, 1.8 V and 240 pins

  • Capacity8GB (2 x 4GB)
  • Dual-channel kit doubles bandwidth with two matched 4 GB modules
  • 667 MHz speed keeps legacy DDR2 systems responsive
  • PC2-5300 and PC2-5400 ratings ensure broad motherboard compatibility
  • 240-pin DIMM fits standard desktop slots without adapters
  • 8 V operation reduces heat and power draw

8GB DDR2 Kit for Desktop Upgrades

This kit provides eight gigabytes of DDR2 memory in two matched 4GB modules. It is intended for desktop systems that accept 240-pin unbuffered DIMMs running at 667MHz. The PC2-5300 and PC2-5400 ratings cover the same speed grade for broad compatibility.

Straightforward DIMM Installation

Each module slots into a standard 240-pin DDR2 socket and is keyed to prevent incorrect insertion. The 1.8V operating voltage matches the DDR2 specification, so no manual voltage adjustment is required. Problems usually arise when mixing these sticks with modules of different speeds or capacities, which can prevent the system from posting.

Verify Motherboard DDR2 Support

Before ordering, confirm that the motherboard uses DDR2 technology and provides 240-pin DIMM slots. Check the board’s maximum supported memory per slot and total capacity to ensure 4GB modules are accepted. Also verify whether the BIOS requires a specific memory density or rank configuration for stable operation.

Põhijooned

  • Dual-channel kit doubles bandwidth with two matched 4 GB modules
  • 667 MHz speed keeps legacy DDR2 systems responsive
  • PC2-5300 and PC2-5400 ratings ensure broad motherboard compatibility
  • 240-pin DIMM fits standard desktop slots without adapters
  • 8 V operation reduces heat and power draw

Tehnilised andmed

Capacity8GB (2 x 4GB)

Küsimused selle toote kohta

How do I confirm the 667MHz modules are running at the correct speed after installation?

Enter the BIOS or UEFI on first boot and verify the memory frequency reads 667MHz with the voltage set to 1.8V; the POST screen or a utility like CPU-Z will also show DDR2-667 operation.

What exactly ships in the kit and is anything else required to use it?

The package contains two 4GB DDR2 DIMMs (240-pin, non-ECC, unbuffered) for a total of 8GB; no extra cables, brackets or software are needed — just a desktop board with DDR2 slots.

Should I choose the PC2-5300 or PC2-5400 labelled version for my system?

Both ratings refer to the same 667MHz modules in this kit; the memory will run at 667MHz on any board that supports DDR2-5300 or DDR2-5400, so either designation is correct.

Veel samast osakonnast

Kliendid võrdlesid neid ka

Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.