Transcend
Transcend StoreJet 25M3 2TB portable hard drive
A rugged 2 TB portable drive with USB 3.1 Gen 1 speed and military-grade shock protection
- InterfaceUSB 3.0
- Capacity2TB
- 2 TB capacity stores large media libraries and backups
- USB 3.1 Gen 1 interface delivers up to 5 Gbps transfer rates
- Three-stage shock protection meets US military drop-test standards
- One-touch auto-backup button starts instant backups without unplugging
- Transcend Elite software manages and organises data for free
2 TB portable drive for mobile backups
The Transcend StoreJet 25M3 provides 2 TB of storage in a slim 2.5-inch enclosure. It connects through a USB 3.0 interface for broad compatibility with laptops and desktops. The ruggedised chassis targets users who transport data between sites and need physical durability.
Sustained throughput on USB 3.1 Gen 1
The drive operates over the USB 3.1 Gen 1 interface rated at 5 Gbps. Real-world transfer rates remain limited by the mechanical disk inside the enclosure rather than the interface ceiling. Extended copy sessions will settle at the platter’s sequential speed once caches are filled.
Single-drive capacity ceiling at 2 TB
The product is offered only in a 2 TB configuration, so larger archives require multiple units. The USB 3.0 connection supplies both data and power without an external adapter. No internal RAID or hardware encryption features are present on this model.
Põhijooned
- 2 TB capacity stores large media libraries and backups
- USB 3.1 Gen 1 interface delivers up to 5 Gbps transfer rates
- Three-stage shock protection meets US military drop-test standards
- One-touch auto-backup button starts instant backups without unplugging
- Transcend Elite software manages and organises data for free
Tehnilised andmed
| Brand | TRANSCEND INFORMATION |
|---|---|
| Interface | USB 3.0 |
| Capacity | 2TB |
Küsimused selle toote kohta
Does the USB 3.1 Gen 1 interface on the StoreJet 25M3 draw much power or run hot during all-day transfers?
The drive uses the USB 3.1 Gen 1 interface, which is bus-powered, so it draws power from the host port and has no external adapter. With no moving fan, heat stays low during continuous use.
What host port or cable must I already have to use this 2.5-inch drive at full speed?
You need a USB 3.0 or USB 3.1 Gen 1 Type-A port on the host and the supplied USB cable. The drive is bus-powered, so no separate power supply is required.
Will the StoreJet 25M3 work reliably alongside an older USB 2.0 laptop I still use?
Yes, the USB 3.1 Gen 1 interface is backward compatible with USB 2.0 ports. Transfer speeds will drop to USB 2.0 rates, but the drive functions normally.
Veel samast osakonnast
Kliendid võrdlesid neid ka
Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.
