Me võtame vastu krüptoraha — nii saab teie hoitav krüptoraha osta päris riistvara.Makske krüptorahaga, kulutage seda päris riistvarale. Tasuta kindlustatud tarne kogu maailmas, üle 399 $. Lihtsad, kaubamärgita väliskarbid, saadetud Saksamaalt.Tasuta kindlustatud tarne üle 399 $. Teie kurss lukustatakse 30 minutiks kohe, kui kassa avaneb.Kurss lukustatud 30 minutiks. Iga toode on pitseeritud, selle seerianumber on kontrollitud ja sellel kehtib 24-kuuline garantii.Pitseeritud, 24-kuulise garantiiga.

Hinnavaatlus Logi sisse
Two black DDR5 memory modules and two matching RGB filler sticks in a 2+2 kit

V-color

V-color Manta XFinity SCC 2+2 Kit 32GB (2×16GB) DDR5 7800MHz CL38 Black

SKU CH-8TF7-97VDT

A 32GB dual-channel DDR5 kit at 7800MHz CL38 with two RGB filler modules for full-slot lighting symmetry

  • Capacity32GB (2 x 16GB)
  • SpeedDDR5 7800 (PC5 62400)
  • Timing38-48-48-126
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • Multi-channel KitDual Channel Kit

Speed DDR5 7800 (PC5 62400)

Läbikriipsutatud versioonid on olemas, kuid neid pole siin saadaval.

  • 32 GB dual-channel kit with two 16 GB DDR5 modules running at 7800 MT/s CL38
  • SK Hynix ICs deliver stable high-speed operation at 1.45 V with 38-48-48-126 timings
  • Premium black heatsink dissipates heat for sustained performance under heavy loads
  • 16 ultra-broad beam LEDs per module provide 60 % brighter RGB lighting synced via motherboard software
  • Patented SCC 2+2 kit adds two RGB filler modules for full four-slot symmetry without extra DRAM cost

SCC 2+2 Kit Composition

The V-color Manta XFinity SCC 2+2 Kit delivers 32GB of DDR5 memory across two 16GB modules plus two RGB filler modules. The filler sticks contain no DRAM and serve only to complete a four-slot motherboard with matching lighting. This kit targets builders who want a full-bank aesthetic without populating every slot with active memory.

Installation and Common Issues

The memory modules and filler sticks install like standard DIMMs into any DDR5 desktop slot. No extra cables or software are required for basic operation. Lighting control relies on motherboard RGB software or Signal RGB; if the motherboard lacks addressable RGB headers the filler modules will remain unlit. Ensure the motherboard supports the rated 7800MT/s speed or the kit will run at a lower JEDEC frequency.

Pre-Order Compatibility Checks

Verify that your motherboard has four DDR5 slots and an addressable RGB header if you want the filler modules illuminated. Confirm the board can run memory at 7800MT/s or at least 8200MT/s overclocked, otherwise the kit will downclock. Check that the CPU memory controller supports 1.45V operation and that the case clearance accommodates the heatsink height. No other voltage or timing figures are provided.

Põhijooned

  • 32 GB dual-channel kit with two 16 GB DDR5 modules running at 7800 MT/s CL38
  • SK Hynix ICs deliver stable high-speed operation at 1.45 V with 38-48-48-126 timings
  • Premium black heatsink dissipates heat for sustained performance under heavy loads
  • 16 ultra-broad beam LEDs per module provide 60 % brighter RGB lighting synced via motherboard software
  • Patented SCC 2+2 kit adds two RGB filler modules for full four-slot symmetry without extra DRAM cost

Tehnilised andmed

BrandV-Color
Capacity32GB (2 x 16GB)
SpeedDDR5 7800 (PC5 62400)
Timing38-48-48-126
ECCNo
Buffered/RegisteredUnbuffered
Multi-channel KitDual Channel Kit
ChipsetSK Hynix IC
ColorBlack
Heat SpreaderYes
FeaturesHigh Speed/Colorful/Cost-effected for Intel XMP/AMD EXPO

Selle mudeli teised versioonid

2 veel samast sarjast

Sama seeria, erinev mälumaht, jahutus või taktsagedus — võrrelge enne otsustamist.

Küsimused selle toote kohta

How can I verify the kit is running at 7800MHz with CL38 timing after I install it?

Enable the Intel XMP or AMD EXPO profile in the BIOS, then confirm the speed reads 7800MT/s and timings show 38-48-48-126 at 1.45V using CPU-Z or the motherboard firmware dashboard.

What exactly ships in the SCC 2+2 kit and do I need to purchase anything else for a four-slot board?

The box contains two 16GB DDR5 DRAM modules and two RGB-only filler modules that hold no memory; together they fill all four DIMM slots so no extra parts are required.

Should I choose the 32GB 7800MHz CL38 version or a higher-speed 8200MT/s option for my build?

This kit is rated at 7800MHz CL38 1.45V with SK Hynix ICs; the 8200MT/s figure is an overclocking target on a four-DIMM board, not a guaranteed XMP/EXPO profile, so select this version for out-of-the-box stability.

Veel samast osakonnast

Kliendid võrdlesid neid ka

Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.