Me võtame vastu krüptoraha — nii saab teie hoitav krüptoraha osta päris riistvara.Makske krüptorahaga, kulutage seda päris riistvarale. Tasuta kindlustatud tarne kogu maailmas, üle 399 $. Lihtsad, kaubamärgita väliskarbid, saadetud Saksamaalt.Tasuta kindlustatud tarne üle 399 $. Teie kurss lukustatakse 30 minutiks kohe, kui kassa avaneb.Kurss lukustatud 30 minutiks. Iga toode on pitseeritud, selle seerianumber on kontrollitud ja sellel kehtib 24-kuuline garantii.Pitseeritud, 24-kuulise garantiiga.

Hinnavaatlus Logi sisse
VEVOR 8 in 1 heat press machine with 15x15 inch teflon platen, swing arm and mug, cap, plate attachments

VEVOR

VEVOR TLM38388 8 in 1 Heat Press 15x15 Inch 3D Printers Accessory

SKU CH-2HZ6-FXP1X MPN TLM38388

Eight-in-one heat press with a 15 by 15 inch platen, cap and plate attachments, plus four mug presses covering 6 to 17 ounce sizes, digital timer to 999 seconds and temperature range of 95 to 232 °C

  • TypeOther Appliances
  • Precise digital control via LCD screen and audible alarm
  • 360° swing-away arm moves heat element aside for safety
  • Eight interchangeable elements cover shirts, caps, mugs and plates
  • Adjustable spring plate distributes pressure evenly across all attachments
  • 1400 W heating reaches 450 °F with timer up to 999 seconds

8-in-1 Heat Press for Sublimation

The VEVOR TLM38388 is a multi-function heat press designed for sublimation, vinyl and heat-transfer projects. It ships fully assembled with a 15x15 inch Teflon-coated platen, a curved hat press, four mug presses and two plate presses. The machine targets hobbyists and small-business users who need interchangeable elements in a single unit.

Digital Controls and 360° Swing Arm

An LCD screen with push-button controls sets temperature between 95 and 232 °C and timer from 0 to 999 seconds. An audible alarm signals when the cycle ends. The swing arm rotates 360 degrees to move the heating element aside, reducing accidental contact and allowing even downward pressure. Two thermal insulation cotton layers, a 4-mm aluminum silicate sheet and a 10-mm thermostable sponge are included to improve transfer quality.

Capacity and Practical Limits

The flat platen measures 38x38 cm and handles standard T-shirt transfers. Mug attachments accept diameters from 5.1 to 8.9 cm covering 6 oz, 11 oz, 12 oz latte and 17 oz latte sizes. Plate presses accommodate 12.7 cm and 15.2 cm maximum diameters. The 1400 W heater reaches full temperature quickly, though very large or thick substrates may exceed the platen area or pressure range.

Põhijooned

  • Precise digital control via LCD screen and audible alarm
  • 360° swing-away arm moves heat element aside for safety
  • Eight interchangeable elements cover shirts, caps, mugs and plates
  • Adjustable spring plate distributes pressure evenly across all attachments
  • 1400 W heating reaches 450 °F with timer up to 999 seconds

Tehnilised andmed

TypeOther Appliances

Küsimused selle toote kohta

How often will the Teflon-coated platen and silicone pad need replacing with daily use?

The 15 x 15 inch Teflon-coated platen and removable silicone pad are built for repeated pressing; replace them when the coating shows wear or the pad loses elasticity.

What limits continuous operation on the 1400 W element?

The digital timer caps each cycle at 999 seconds, so sustained runs are broken into repeated heat-up and cool-down intervals.

How hot does the exterior get during an all-day production run?

Two layers of thermal insulation cotton, 4 mm aluminum silicate paper and a 10 mm thermostable sponge keep the outer surfaces cool to the touch.

Veel samast osakonnast

Kliendid võrdlesid neid ka

Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.