Me võtame vastu krüptoraha — nii saab teie hoitav krüptoraha osta päris riistvara.Makske krüptorahaga, kulutage seda päris riistvarale. Tasuta kindlustatud tarne kogu maailmas, üle 399 $. Lihtsad, kaubamärgita väliskarbid, saadetud Saksamaalt.Tasuta kindlustatud tarne üle 399 $. Teie kurss lukustatakse 30 minutiks kohe, kui kassa avaneb.Kurss lukustatud 30 minutiks. Iga toode on pitseeritud, selle seerianumber on kontrollitud ja sellel kehtib 24-kuuline garantii.Pitseeritud, 24-kuulise garantiiga.

Hinnavaatlus Logi sisse
Small red circuit board with SFF-8643 and M-key connectors

Vszerda

Vszerda SF-094 SFF-8643 to NGFF hard drive adapter

SKU CH-QW0H-G6KQ1

Connects an M-key NVMe SSD to a U.2 (SFF-8639) port via SFF-8643 Mini SAS HD with PCIe 3.0 x4

  • Connects M.2 NVMe SSD to U.2 backplane using SFF-8643 Mini SAS HD
  • PCIe 3.0 x4 lane delivers 4 GBps bandwidth for NVMe performance
  • Red PCBA kit includes SFF-8639 U.2 connector for direct drive attachment
  • Lightweight 0.05 kg adapter adds minimal mass to dense server builds
  • Requires Windows 7 or Server 2008 R2 KB2990941 update for native NVMe driver support

Vszerda SF-094 U.2 to M.2 Adapter

The Vszerda SF-094 is a printed-circuit adapter that converts a U.2 (SFF-8639) backplane or cable connection to an M-key M.2 slot. It carries a PCIe 3.0 x4 electrical link rated at 4 GBps, allowing an NVME SSD to connect directly to a server or workstation mainboard that provides an SFF-8643 Mini SAS HD port.

Suits NVME drives on U.2 infrastructure

This adapter suits builders installing an M-key NVME SSD into a system wired for U.2 drive bays or SFF-8643 host connectors. It is not for drives that lack an M-key edge connector, nor for platforms that cannot supply a PCIe 3.0 x4 link to the U.2 port. Legacy operating systems such as Windows 7 require a separate NVME driver update before the drive will be recognised.

PCIe 3.0 x4 lane width decides compatibility

The single specification that determines whether this part works is the host providing a true PCIe 3.0 x4 connection to the SFF-8643 connector. If the mainboard or backplane routes fewer lanes or an older PCIe generation, the SSD will not reach the stated 4 GBps throughput or may fail to enumerate.

Põhijooned

  • Connects M.2 NVMe SSD to U.2 backplane using SFF-8643 Mini SAS HD
  • PCIe 3.0 x4 lane delivers 4 GBps bandwidth for NVMe performance
  • Red PCBA kit includes SFF-8639 U.2 connector for direct drive attachment
  • Lightweight 0.05 kg adapter adds minimal mass to dense server builds
  • Requires Windows 7 or Server 2008 R2 KB2990941 update for native NVMe driver support

Tehnilised andmed

Selle toote kohta ei ole veel tehnilisi andmeid avaldatud.

Küsimused selle toote kohta

Which M.2 SSD keying does the SF-094 support?

The adapter connects an M-key NVMe SSD to a U.2 SFF-8639 backplane.

What throughput can I expect from the PCIe 3.0 x4 link?

The board passes a PCIe 3.0 x4 signal rated at 4 GBps between the M.2 drive and the SFF-8643 Mini SAS HD connector.

Does the SFF-8643 Mini SAS HD interface limit the drive speed?

No, the SFF-8643 connector carries the full PCIe 3.0 x4 lane width, so it does not cap the NVMe SSD performance.

Veel samast osakonnast

Kliendid võrdlesid neid ka

Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.