Me võtame vastu krüptoraha — nii saab teie hoitav krüptoraha osta päris riistvara.Makske krüptorahaga, kulutage seda päris riistvarale. Tasuta kindlustatud tarne kogu maailmas, üle 399 $. Lihtsad, kaubamärgita väliskarbid, saadetud Saksamaalt.Tasuta kindlustatud tarne üle 399 $. Teie kurss lukustatakse 30 minutiks kohe, kui kassa avaneb.Kurss lukustatud 30 minutiks. Iga toode on pitseeritud, selle seerianumber on kontrollitud ja sellel kehtib 24-kuuline garantii.Pitseeritud, 24-kuulise garantiiga.

Hinnavaatlus Logi sisse
Small 4.3 inch portable monitor with HDMI port and capacitive touchscreen

WaveShare

WaveShare 4.3inch HDMI LCD 800x480 IPS Capacitive Touch Screen portable monitor

SKU CH-7MDX-DPNY7

A 4.3 inch portable IPS touchscreen with 800x480 resolution, HDMI input, and multi-system support including Raspberry Pi and Windows

  • CPU TypeOther
  • Compact 4.3 inch IPS panel for portable setups
  • 800x480 hardware resolution scales to 1920x1080 by software
  • Capacitive five-point touch works driver-free on Windows
  • HDMI input supports Raspberry Pi, Jetson Nano, Banana Pi and Xbox 360
  • 5 mm audio jack plus speaker connector for sound output

Compact HDMI Touch Display

The WaveShare 4.3inch HDMI LCD is a portable monitor with an IPS panel and capacitive touch surface. It targets hobbyists and developers who need a small secondary screen for single-board computers or desktop systems. The hardware resolution is 800x480, making it suitable for status dashboards, embedded interfaces or basic media playback.

Multi-System Connectivity Kit

The package supports Raspberry Pi boards including the 4B, 3B+, 3B, 2B and Zero variants without additional drivers for Raspbian, Ubuntu, Kali, Retropie or Windows 10 IoT. Jetson Nano, BeagleBone Black and Banana Pi are also compatible. A 3.5mm audio jack and speaker connector allow HDMI audio output, while an on-screen menu handles brightness, contrast and power settings.

HDMI Interface Constraints

The display accepts a standard HDMI signal and can scale input up to 1920x1080 through software configuration, though the native panel remains 800x480. Touch input on Windows 10, 8.1, 8 and 7 is limited to five simultaneous points and requires no driver installation. Raspberry Pi Zero users must source a mini HDMI adapter and USB adapter separately to connect the screen.

Põhijooned

  • Compact 4.3 inch IPS panel for portable setups
  • 800x480 hardware resolution scales to 1920x1080 by software
  • Capacitive five-point touch works driver-free on Windows
  • HDMI input supports Raspberry Pi, Jetson Nano, Banana Pi and Xbox 360
  • 5 mm audio jack plus speaker connector for sound output

Tehnilised andmed

CPU TypeOther

Küsimused selle toote kohta

Will the capacitive touch layer or the IPS panel need replacement after heavy daily use?

The 4.3inch IPS panel and capacitive touch layer are solid-state components with no moving parts, so no scheduled replacement is required under normal operation.

What limits continuous operation first — the HDMI link, the touch controller or the panel heat?

The 800x480 hardware resolution and HDMI interface set the bandwidth ceiling; sustained use will hit that pixel-clock limit before thermal or touch-controller constraints appear.

How much heat and fan noise should I expect when the screen runs all day on a Raspberry Pi?

The display draws power over USB and HDMI with no built-in fan; heat stays low and operation is silent, while the 3.5mm audio jack handles HDMI audio output separately.

Veel samast osakonnast

Kliendid võrdlesid neid ka

Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.