Me võtame vastu krüptoraha — nii saab teie hoitav krüptoraha osta päris riistvara.Makske krüptorahaga, kulutage seda päris riistvarale. Tasuta kindlustatud tarne kogu maailmas, üle 399 $. Lihtsad, kaubamärgita väliskarbid, saadetud Saksamaalt.Tasuta kindlustatud tarne üle 399 $. Teie kurss lukustatakse 30 minutiks kohe, kui kassa avaneb.Kurss lukustatud 30 minutiks. Iga toode on pitseeritud, selle seerianumber on kontrollitud ja sellel kehtib 24-kuuline garantii.Pitseeritud, 24-kuulise garantiiga.

Hinnavaatlus Logi sisse
Green circuit board with two M.2 slots, silver heatsinks, and PCIe x1 gold fingers

WRIARICH

WRIARICH Dual M.2 NVMe to PCIe Adapter with Heat Sink Low Profile Bracket

SKU CH-C19G-5GS49

Adds two M.2 NVMe SSDs via a single PCIe slot with included heatsinks and low-profile bracket

  • Changer TypeSATA
  • Specificationspci_express_x1, 15 L x 12 W x 2.8 H centimeters, 58 grams, E
  • Connector Apci_express_x1
  • Connector Bpci_express_x1
  • Connector StyleStandard
  • Featuresstandard, pci_express_x1, Desktop
  • Run two NVMe SSDs simultaneously with dual M.2 slots
  • Stable power from PCIe slot, no external adapter needed
  • Copper strips and two heatsinks lower drive temperatures
  • Works with Windows 10, 11, Linux and Mac OS plug and play
  • Fits PCIe X1, X4, X8 and X16 slots with low-profile bracket

Dual NVMe PCIe adapter for desktop upgrades

This WRIARICH adapter lets a desktop motherboard run two M.2 NVMe SSDs simultaneously through a single PCI Express x1 slot. It accepts M-Key and B+M Key drives in 2230, 2242, 2260 and 2280 lengths. M.2 SATA SSDs are not supported. The card draws power directly from the slot so no external adapter is needed.

Thermals noise and power in normal use

Two aluminium heat sinks and copper strips with a multi-hole layout dissipate heat from both drives during operation. The passive design adds no fan noise to the system. A solid capacitor on the board smooths voltage delivery to each SSD for stable power draw from the PCI Express slot.

Low-profile brackets and tools included

The package supplies a long and a short bracket so the card fits standard and low-profile cases. Two mounting screws and a screwdriver are provided for drive installation. No driver is required; the adapter works with Windows 11, 10, 8, 7, Linux and Mac OS after the new SSDs are initialised and formatted.

Põhijooned

  • Run two NVMe SSDs simultaneously with dual M.2 slots
  • Stable power from PCIe slot, no external adapter needed
  • Copper strips and two heatsinks lower drive temperatures
  • Works with Windows 10, 11, Linux and Mac OS plug and play
  • Fits PCIe X1, X4, X8 and X16 slots with low-profile bracket

Tehnilised andmed

BrandSoNNeT
SeriesDUAL-NVME-PCIE-X1-5GBPS-EM5012NV-BK
ModelDUAL-NVME-PCIE-X1-5GBPS-EM5012NV-BK
Changer TypeSATA
Specificationspci_express_x1, 15 L x 12 W x 2.8 H centimeters, 58 grams, ELUTENG, DUAL-NVME-PCIE-X1-5GBPS-EM5012NV-BK, Desktop
Connector Apci_express_x1
Connector Bpci_express_x1
Connector StyleStandard
Featuresstandard, pci_express_x1, Desktop
Dimensions20'
Weight58 grams
Package Contentsstandard
Disclaimernot_applicable

Küsimused selle toote kohta

How do I fit the adapter into a low-profile case and which bracket do I use?

Use the included short baffle for low-profile chassis; secure it with the two supplied screws and install the two heatsinks on the SSDs before closing the case.

What upkeep do the copper heat strips and heatsinks need over time?

Blow dust from the multi-hole cooling fins and copper strips every few months; reapply thermal paste on the SSD contact points if temperatures rise.

At what throughput does the PCIe x1 link cap sustained transfers?

The PCIe x1 interface limits continuous reads and writes to 5 Gbps regardless of SSD speed.

Veel samast osakonnast

Kliendid võrdlesid neid ka

Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.