Me võtame vastu krüptoraha — nii saab teie hoitav krüptoraha osta päris riistvara.Makske krüptorahaga, kulutage seda päris riistvarale. Tasuta kindlustatud tarne kogu maailmas, üle 399 $. Lihtsad, kaubamärgita väliskarbid, saadetud Saksamaalt.Tasuta kindlustatud tarne üle 399 $. Teie kurss lukustatakse 30 minutiks kohe, kui kassa avaneb.Kurss lukustatud 30 minutiks. Iga toode on pitseeritud, selle seerianumber on kontrollitud ja sellel kehtib 24-kuuline garantii.Pitseeritud, 24-kuulise garantiiga.

Hinnavaatlus Logi sisse
Small black 50mm square frame 15mm thick with 2-pin connector

Zyvpee

Zyvpee AD5024XS-D71 50mm 5015 DC24V 0.13A 2-pin CPU cooler

SKU CH-JFBF-30GWG

A 50 mm sleeve-bearing case fan spinning below 1600 RPM at 24 V and 0.13 A with a two-pin connector

  • TypeCase Fan
  • Bearing Typesleeve
  • RPM<1600 RPM
  • Power Connector2 Pin
  • ColorBlack
  • LEDNon-LED
  • Compact 50×15 mm footprint fits tight builds
  • 24 V 0.13 A draw keeps power use low
  • Sub-1600 RPM sleeve bearing runs quietly
  • Two-pin connector simplifies wiring
  • Black non-LED design suits clean aesthetics

Compact 50 mm CPU cooler for tight builds

The Zyvpee AD5024XS-D71 is a 50 mm square frame with a 15 mm thickness designed for small-form-factor systems that need active processor cooling. It runs on a 24 V supply drawing 0.13 A through a simple two-pin connector. The sleeve bearing keeps the unit light and straightforward for basic thermal management.

Replaces larger tower coolers when space is

This low-profile fan fits where full-height heatsinks cannot, making the jump worthwhile for ITX boards, thin clients or embedded appliances with a 5015 mounting pattern. Builders who need more airflow or quieter operation at higher loads should look at larger coolers with bigger fin stacks and PWM control.

Two-pin 24 V power limits speed control

The fixed-voltage two-wire interface means the fan spins up to its rated 1600 RPM ceiling without PWM regulation or tachometer feedback. Systems that require variable speed curves, automatic thermal throttling or RPM reporting will need a different connector standard or an external fan controller.

Põhijooned

  • Compact 50×15 mm footprint fits tight builds
  • 24 V 0.13 A draw keeps power use low
  • Sub-1600 RPM sleeve bearing runs quietly
  • Two-pin connector simplifies wiring
  • Black non-LED design suits clean aesthetics

Tehnilised andmed

Brand3ccooler.com
SeriesAD5024XS-D71
ModelAD5024XS-D71
TypeCase Fan
Bearing Typesleeve
RPM<1600 RPM
Power Connector2 Pin
ColorBlack
LEDNon-LED
FeaturesCPU Fan
Dimensions50*15mm

Küsimused selle toote kohta

Will the 50 mm by 15 mm frame fit my 5015 mounting holes?

Yes, the fan measures exactly 50 mm square by 15 mm thick, matching the standard 5015 footprint.

How do I connect the two-pin lead to a 24 V header without reversing polarity?

Align the two wires with the header’s keyed slot; the connector only seats one way, preventing reverse insertion.

When should I plan to replace the sleeve-bearing fan?

Sleeve bearings typically last several years at 1600 RPM; listen for increased noise or RPM drop as a sign to swap it.

Veel samast osakonnast

Kliendid võrdlesid neid ka

Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.