Zyvpee
Zyvpee DFS122524H 120mm DC24V 43W 2-pin case fan
120 mm DC 24 V case fan with sleeve bearing, 2500–2999 RPM and 25–30 dBA noise
- TypeCase Fan
- CompatibilityCase
- Bearing TypeSleeve bearing
- RPM2500-2999 RPM
- Noise Level25 - 30 dBA
- Power Connector2 Pin
- Quiet 25–30 dBA operation for low-noise builds
- 2500–2999 RPM airflow suits standard case cooling
- 120 mm square frame fits common 120 mm mounts
- DC 24 V 43 W power on simple 2-pin connector
- Sleeve bearing keeps cost down for basic cooling
Zyvpee DFS122524H 120 mm case fan
The Zyvpee DFS122524H is a 120 mm case fan designed for standard computer chassis cooling. It operates on a 24 V DC supply and uses a sleeve bearing for rotation. The unit measures 120 mm by 120 mm by 25 mm and has a black frame with no LED lighting.
Suits 24 V systems needing basic airflow
This fan suits builders populating a 24 V cooling circuit in a server or industrial enclosure where simple airflow is required. Buyers who need PWM speed control, a three- or four-pin connector, or lower noise levels should look at alternative models.
24 V DC operating voltage decides fit
The single specification that decides compatibility is the 24 V DC operating voltage. Your chassis or controller must supply exactly this voltage; a 12 V header will not drive the fan correctly.
Põhijooned
- Quiet 25–30 dBA operation for low-noise builds
- 2500–2999 RPM airflow suits standard case cooling
- 120 mm square frame fits common 120 mm mounts
- DC 24 V 43 W power on simple 2-pin connector
- Sleeve bearing keeps cost down for basic cooling
Tehnilised andmed
| Series | DFS122524H |
|---|---|
| Model | DFS122524H |
| Type | Case Fan |
| Compatibility | Case |
| Bearing Type | Sleeve bearing |
| RPM | 2500-2999 RPM |
| Noise Level | 25 - 30 dBA |
| Power Connector | 2 Pin |
| Color | Black |
| LED | Non-LED |
| Features | DC square Cooler |
| Dimensions | 120mm*120mm*25mm |
Küsimused selle toote kohta
How do I install the DFS122524H fan and which way do the two wires go?
Mount the 120 mm frame with four screws, then plug the 2-pin connector onto a 24 V DC header so the marked wire lines up with the positive pin.
What maintenance will the sleeve bearing need later?
The sleeve bearing is sealed and not user-serviceable; when noise rises above the 25–30 dBA range the fan should be replaced.
At what point does the 2500–2999 RPM speed become limited under sustained load?
The 43 W power ceiling and fixed 24 V supply cap the RPM at the rated 2999 maximum during continuous operation.
Veel samast osakonnast
Kliendid võrdlesid neid ka
Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.
ModMyMods
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear
0,82 $
0.00001051BTC
Laos