Me võtame vastu krüptoraha — nii saab teie hoitav krüptoraha osta päris riistvara.Makske krüptorahaga, kulutage seda päris riistvarale. Tasuta kindlustatud tarne kogu maailmas, üle 399 $. Lihtsad, kaubamärgita väliskarbid, saadetud Saksamaalt.Tasuta kindlustatud tarne üle 399 $. Teie kurss lukustatakse 30 minutiks kohe, kui kassa avaneb.Kurss lukustatud 30 minutiks. Iga toode on pitseeritud, selle seerianumber on kontrollitud ja sellel kehtib 24-kuuline garantii.Pitseeritud, 24-kuulise garantiiga.

Hinnavaatlus Logi sisse
Black 80 by 25 millimetre case fan with two power wires

Zyvpee

Zyvpee FD128025EB-N 80mm case fan 25mm 12V .45A 2-pin

SKU CH-D3P1-GVBPY

80 mm case fan with ball bearing, 12 V .45 A draw and two-pin connector

  • TypeCase Fan
  • CompatibilityCase
  • Bearing TypeBall
  • Power Connector2 Pin
  • ColorBlack
  • LEDNo
  • 80 mm frame fits standard case mounts
  • 25 mm thickness clears tight chassis spaces
  • Ball bearing reduces friction for longer life
  • 12 V .45 A draw keeps power use low
  • Two-pin DC connector enables simple voltage control

80mm 12V DC case fan

The Zyvpee FD128025EB-N is an 80mm case fan built for standard 12V DC operation. It draws 0.45A through a two-pin power connector. The frame measures 80 by 25mm and uses a ball bearing. No LED lighting is fitted.

Ball bearing thermals and noise

The ball bearing supports continuous rotation at the rated voltage. Power draw stays at 0.45A on the 12V line. Acoustic output will reflect the bearing type and the 80 by 25mm form factor under normal case airflow.

Two-pin fit and clearance

The two-pin connector plugs directly into a matching header on the motherboard or a fan controller. The 80 by 25mm footprint suits cases designed for 80mm mount points. No RGB headers or PWM lines are required, leaving those connections free for other components.

Põhijooned

  • 80 mm frame fits standard case mounts
  • 25 mm thickness clears tight chassis spaces
  • Ball bearing reduces friction for longer life
  • 12 V .45 A draw keeps power use low
  • Two-pin DC connector enables simple voltage control

Tehnilised andmed

BrandZyvpee
SeriesFD128025EB-N
ModelFD128025EB-N
TypeCase Fan
CompatibilityCase
Bearing TypeBall
Power Connector2 Pin
ColorBlack
LEDNo
FeaturesDC Case Fan
Dimensions80*25mm

Küsimused selle toote kohta

How do I install the FD128025EB-N 80mm fan and what is the common mistake with the 2-pin connector?

Mount the 80 by 25 millimetre frame using four screws through the corner holes, then plug the 2-pin connector into a 12 volt motherboard header or fan controller; the mistake is reversing the polarity because the 2-pin plug lacks a keyed guide.

What maintenance will the ball bearing in this FD128025EB-N fan need over time?

The sealed ball bearing is lubricated for life and requires no re-oiling; if noise or vibration appears after years of 12 volt .45 amp operation, the entire fan must be replaced as bearings are not user-serviceable.

At what point does the 12 volt .45 amp rating become the limiting factor during sustained use?

The .45 amp draw is fixed by the motor design, so the limit appears immediately — the fan will always pull .45 amps at 12 volts, and any header or controller rated below that current will trip or overheat first.

Veel samast osakonnast

Kliendid võrdlesid neid ka

Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.