Me võtame vastu krüptoraha — nii saab teie hoitav krüptoraha osta päris riistvara.Makske krüptorahaga, kulutage seda päris riistvarale. Tasuta kindlustatud tarne kogu maailmas, üle 399 $. Lihtsad, kaubamärgita väliskarbid, saadetud Saksamaalt.Tasuta kindlustatud tarne üle 399 $. Teie kurss lukustatakse 30 minutiks kohe, kui kassa avaneb.Kurss lukustatud 30 minutiks. Iga toode on pitseeritud, selle seerianumber on kontrollitud ja sellel kehtib 24-kuuline garantii.Pitseeritud, 24-kuulise garantiiga.

Hinnavaatlus Logi sisse
Black 80x38mm axial case fan with 2-pin connector

Zyvpee

Zyvpee SM8038BH 80x38mm 24V 0.35A 2-pin ball-bearing case fan

SKU CH-JH33-6SBHN

An 80 mm square case fan with dual ball bearings, 24 V operation, 0.35 A draw, 5000 to 5499 RPM and 35 to 40 dBA noise

  • TypeCase Fan
  • CompatibilityCase
  • Bearing Type2 Ball
  • RPM5000-5499 RPM
  • Noise Level35 - 40 dBA
  • Power Connector2 Pin
  • 24 V DC power for industrial and server chassis
  • Dual ball-bearing design extends service life
  • 5000–5499 RPM airflow for dense component cooling
  • 35–40 dBA acoustic profile suits noise-sensitive builds
  • Compact 80 × 38 mm frame fits tight mounting spaces

24 V 80 mm axial fan for case cooling

The Zyvpee SM8038BH is a DC square cooler designed for standard 80 mm case mounts. It runs on a 24 V supply drawing .35 A and connects through a 2-pin header. The 80*80*38 mm frame fits typical chassis fan locations.

Ball-bearing thermals at 5000-5499 RPM

Dual ball bearings support a speed range of 5000-5499 RPM while producing 35-40 dBA of noise. The 24 V motor delivers consistent airflow without PWM control. Black non-LED blades keep the visual profile neutral inside the case.

Two-pin simplicity with no extra software

The 2-wire 2-pin connector provides power only; no tachometer or PWM signal is present. No bundled software, adapters or controllers are included. Builders needing speed feedback or automatic curves must add a separate fan controller.

Põhijooned

  • 24 V DC power for industrial and server chassis
  • Dual ball-bearing design extends service life
  • 5000–5499 RPM airflow for dense component cooling
  • 35–40 dBA acoustic profile suits noise-sensitive builds
  • Compact 80 × 38 mm frame fits tight mounting spaces

Tehnilised andmed

SeriesSM8038BH
ModelSM8038BH
TypeCase Fan
CompatibilityCase
Bearing Type2 Ball
RPM5000-5499 RPM
Noise Level35 - 40 dBA
Power Connector2 Pin
ColorBlack
LEDNon-LED
FeaturesDC square Cooler
Dimensions80*80*38mm

Küsimused selle toote kohta

How do I mount the 80x80x38mm frame and where does the 2-pin lead connect?

Align the four corner holes with the case fan mounts and secure with standard screws, then plug the 2-pin connector into a 24V DC fan header, ensuring polarity matches the red and black wires.

What maintenance will the 2-ball bearing need over time?

The dual ball bearing is sealed and requires no lubrication; if noise rises above the rated 35-40 dBA or speed drops below 5000 RPM, replace the entire fan unit.

At what point does the 5000-5499 RPM range become unsustainable during continuous operation?

Sustained running at the upper end of the 5000-5499 RPM band increases bearing wear and pushes noise toward the 40 dBA limit, so expect earlier replacement if airflow demand keeps it there constantly.

Veel samast osakonnast

Kliendid võrdlesid neid ka

Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.