A-Tech 16GB DDR3 1600 RDIMM ECC for HP Z420 Z620 Z820
- 16GB
- 240-Pin DDR3 SDRAM
Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.
A-Tech
Eight 16 GB DDR3-1600 registered ECC modules delivering 128 GB for HP Z420, Z620 and Z820 workstations
Capacity 128GB (8 x 16GB)
This 128GB kit fills every DIMM slot on second-generation HP Z Workstation Z420, Z620 and Z820 models. It is built for professionals who need the highest supported memory capacity for virtualisation, rendering or large-dataset workloads on these specific platforms. Buyers who want more storage or a different memory generation will not be served by this product.
The modules are DDR3 1600 (PC3-12800) RDIMMs with ECC, 2Rx4 organisation and 1.50V operation. This exact combination of registered buffering, error correction, dual-rank x4 layout and voltage is what the Z420, Z620 and Z820 memory controller expects for full 128GB operation. Mixing with unbuffered ECC UDIMMs is not supported.
Installation means placing all eight 240-pin DIMMs into the correct channels as shown in the workstation service manual. The most common issue is populating slots in the wrong order, which prevents the system from recognising the full 128GB or forces a slower speed. No heat spreaders are fitted, so clearance is standard.
| Brand | A-Tech |
|---|---|
| Series | 2nd Gen. HP Z Workstation Compatible |
| Model | 128GB (8x16GB) 2Rx4 PC3-12800 RDIMM for HP Z Workstation Z420, Z620, Z820 (Max Memory) |
| Part Number | NE-MS-0099 |
| Capacity | 128GB (8 x 16GB) |
| Type | 240-Pin DDR3 SDRAM |
| Speed | DDR3 1600 (PC3 12800) |
| CAS Latency | CL11 |
| Voltage | 1.50V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Compatible System | HP Z Workstation Z420, Z620, Z820 |
| Option | Compatible with HP Z Workstation Z420, Z620, Z820 |
| Features | Designed for HP Z Workstation Z420, Z620, Z820 |
| Package Content | Eight Modules |
A modell további verziói
Ugyanaz a termékcsalád, eltérő memória, hűtés vagy órajel — hasonlítsa össze, mielőtt dönt.
This kit fills all available DIMM slots to reach the maximum supported memory, letting the workstation handle large datasets, virtual machines and multi-application workloads without paging to disk.
The modules run at DDR3 1600MHz; the registered buffer adds one cycle of latency, so the system operates at the rated 1600MHz transfer rate while maintaining signal integrity across all eight slots.
Yes, each module uses the standard 240-pin DDR3 RDIMM form factor with 2Rx4 organisation, matching the workstation's registered memory slots and allowing all eight to be installed simultaneously.
Szintén ezen a polcon
Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.
Amivel fizet, és amiben az árakat olvassa.
A pénztárnál küldi el a tárcájából
Csak tájékoztató jellegű — a katalógus dollárban van árazva
Nincs ilyen pénznem.
Válassza ki, milyen nyelven szóljon Önhöz az oldal.
Először jár itt?
Már van fiókja?
Nincs automatikus visszaállítás: ez a bolt nem küld e-mailt, tehát nincs kérhető egyszer használatos link. Hagyja meg a fiókhoz tartozó címet, azt valaki kézzel átnézi.
Kérés rögzítve
Semmi nem érkezik a postafiókjába — ez a bolt egyáltalán nem küld e-mailt. Ezeket valaki kézzel intézi.
Eszébe jutott?