Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.

Árfigyelő lista Bejelentkezés
Green 240-pin DDR3L ECC RDIMM with black memory chips

A-Tech

A-Tech 16GB DDR3L 1333 ECC RDIMM 4Rx8 1.35V 240-Pin Server RAM

SKU CH-EP29-J4AMB

A 16GB DDR3L 1333MHz ECC registered DIMM with 4Rx8 organisation and 1.35V low-voltage operation for server memory upgrades

  • Capacity16GB
  • SpeedDDR3L 1333 (PC3L 10600)
  • CAS LatencyCL9
  • Voltage1.35V
  • ECCYes
  • Buffered/RegisteredRegistered
  • 16 GB DDR3L 1333 MHz capacity for high-density server workloads
  • ECC registered design detects and corrects single-bit errors automatically
  • 35 V low-voltage operation reduces power draw and heat
  • 4Rx8 quad-rank organisation maximises memory density per slot
  • 240-pin DIMM form factor fits standard DDR3 server motherboards

16GB DDR3L ECC RDIMM 1333 Server Memory

This A-Tech module provides 16GB of DDR3L registered ECC memory at 1333MHz. It operates at 1.35V with CL9 latency and a 4Rx8 rank configuration. The 240-pin DIMM is built as a compatible replacement for the Micron MT36KDZS2G72PDZ-1G4E1 part. It targets servers and workstations that require low-voltage registered error-correcting memory.

Suited for DDR3L registered ECC platforms needing

This module fits systems that specifically support DDR3L 1333MHz registered ECC DIMMs at 1.35V. It is not suitable for desktop boards that only accept unbuffered non-ECC memory. It cannot be used in systems requiring a different DDR generation, voltage, form factor, or rank arrangement. Always verify the motherboard qualified vendor list before installing.

Registered ECC with 4Rx8 organisation at 1.35V

The single specification that decides compatibility is the combination of registered ECC operation, 4Rx8 rank structure, and 1.35V DDR3L voltage. A motherboard must support all three attributes together for this module to function. If the platform requires unbuffered memory, a different rank count, or 1.5V DDR3, this DIMM will not work.

Erősségek

  • 16 GB DDR3L 1333 MHz capacity for high-density server workloads
  • ECC registered design detects and corrects single-bit errors automatically
  • 35 V low-voltage operation reduces power draw and heat
  • 4Rx8 quad-rank organisation maximises memory density per slot
  • 240-pin DIMM form factor fits standard DDR3 server motherboards

Műszaki adatok

BrandA-Tech
SeriesCompatible Replacement for Micron
ModelMT36KDZS2G72PDZ-1G4E1
Capacity16GB
SpeedDDR3L 1333 (PC3L 10600)
CAS LatencyCL9
Voltage1.35V
ECCYes
Buffered/RegisteredRegistered
Rank4Rx8
ChipsetMicron Chipset
FeaturesMT36KDZS2G72PDZ-1G4E1

Kérdések a termékről

Should I pick the 16GB 4Rx8 module or a lower-rank alternative?

Choose the 16GB 4Rx8 module when your server requires that exact rank and density; verify the system manual lists 4Rx8 support before ordering.

What does the 1333MHz rating deliver inside a running server?

The module runs at DDR3L 1333MHz with CL9 latency, providing 10600 MB/s peak bandwidth for registered ECC workloads.

Is the DDR3L 1.35V interface compatible with standard DDR3 1.5V slots?

DDR3L 1.35V modules fit 240-pin DDR3 slots and will operate at 1.5V if the platform does not support low-voltage operation.

Szintén ezen a polcon

Vásárlók ezeket hasonlították össze

Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.