Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.

Árfigyelő lista Bejelentkezés
Green rectangular circuit board with gold edge connectors and black memory chips

A-Tech

A-Tech 16GB DDR3L 1600 ECC RDIMM 2Rx4 for Hynix HMT42GR7 Server RAM

SKU CH-DGG9-F4KHJ

A 16 GB DDR3L 1600 registered ECC server module built with major-brand chips at 1.35 V, replacing Hynix HMT42GR7 parts

  • Capacity16GB
  • SpeedDDR3L 1600 (PC3L 12800)
  • CAS LatencyCL11
  • Voltage1.35V
  • ECCYes
  • Buffered/RegisteredRegistered
  • 16 GB capacity handles heavy server workloads
  • DDR3L 1600 speed with CL11 latency
  • ECC registered design protects data integrity
  • 35 V low voltage reduces power draw
  • 240-pin DIMM fits Hynix HMT42GR7 series

16GB DDR3L ECC RDIMM for Servers

This 16GB DDR3L 1600 ECC Registered DIMM targets administrators upgrading Hynix-compatible servers and workstations. The module delivers 16GB capacity at PC3L-12800 speed with CL11 latency. Error-correcting code and registered buffering suit multi-socket platforms requiring data integrity. It replaces Hynix HMT42GR7AFR4A-PB, HMT42GR7BFR4A-PB, HMT42GR7DFR4A-PB and HMT42GR7MFR4A-PB parts directly.

DDR3L 1.35V Registered Interface Limits

The DDR3L standard operates at 1.35V, lower than standard DDR3, so the platform must support low-voltage DIMMs. Registered signalling adds a clock cycle, which affects command timing compared with unbuffered memory. Maximum bus frequency is 1600 MT/s; the memory controller must be qualified for this speed with registered modules. Mixed-voltage populations are not supported by the DDR3L specification.

Compatibility Checks Before Ordering

Verify that your system board lists DDR3L 1600 ECC RDIMM 2Rx4 240-pin DIMMs on its qualified vendor list. Confirm the CPU memory controller supports registered low-voltage modules at this density. Ensure the BIOS revision enables ECC and registered operation for the target slots. Check that no slot population rules forbid 16GB dual-rank modules in your configuration.

Erősségek

  • 16 GB capacity handles heavy server workloads
  • DDR3L 1600 speed with CL11 latency
  • ECC registered design protects data integrity
  • 35 V low voltage reduces power draw
  • 240-pin DIMM fits Hynix HMT42GR7 series

Műszaki adatok

BrandA-Tech
Capacity16GB
SpeedDDR3L 1600 (PC3L 12800)
CAS LatencyCL11
Voltage1.35V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Kérdések a termékről

Should I choose the 16GB DDR3L 1600 ECC RDIMM 2Rx4 or a different capacity for my server?

This module provides a single 16GB stick at DDR3L 1600 with CL11 latency and 1.35V operation. Select it when your system requires a registered DIMM with 2Rx4 organisation and you need exactly 16GB per slot.

What does the 1600MHz speed rating deliver once the module is installed in a live server?

At DDR3L 1600 (PC3L-12800) the memory runs at 1600 MT/s with CL11 timing, giving the rated bandwidth for registered ECC workloads while operating at the low 1.35V voltage.

How does the DDR3L 240-pin RDIMM interface limit performance in practice?

The 240-pin DDR3L RDIMM interface caps the module at 1600 MT/s and 1.35V; the registered buffer adds one cycle of latency but allows the memory controller to drive larger capacities reliably.

Szintén ezen a polcon

Vásárlók ezeket hasonlították össze

Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.